is it possible to make evo from lancer?

Can you fit a regular body kit for an evolution to a lancer? Cos i know I won't be rich enough to own a real evolution, so they thought came across my mind if i could just buy the evolution bumpers and side skirts, and put them onto a lancer. Is it possible?

No you can't, the sheetmetal is significantly different.

Also, that would be rice at its worst since the car would still perform like a base model.

No you can't, the sheetmetal is significantly different.

Also, that would be rice at its worst since the car would still perform like a base model.


Silly answer man:


Ofcourse you can do the transformation, it will just cost a bit of money since the bodyshells are the same.

For example on an EVO 1-2-3 the front fenders are slightly different from an fwd to an EVO. & aslo the front bumper.


Kristian/ EVO 2 RWD

Silly answer man:


Ofcourse you can do the transformation, it will just cost a bit of money since the bodyshells are the same.

For example on an EVO 1-2-3 the front fenders are slightly different from an fwd to an EVO. & aslo the front bumper.


Kristian/ EVO 2 RWD

those are already evo's though, they do share the same chassis, but the fender flares and other mods that it takes to make it an "evo" are different. I don't know if you've compared a Lancer to a newer one, but it looks "skimpy" compared to the evo. Don't forget things like wheels, hood and etc.

and what evo model are you talking about?

He lives in the US, so the earliest Lancer he could get is a 2002

didn't notice that, it would be a lot of custom fab to get it to look like a 7, or 8?

horrible attitude by the way.. "i wont be rich enough to get an evo"


work harder, save more, spend less

unless u don't really want an evo

We used to ask that question back in the day prior to the release of the Evo in 2003, and the Evo VIII in 2004.

2003 models were not badged nor sold in the U.S. as EVO VIII's.
2004 were the first. While I don't see much difference.

Either way, point is, it would take a lot. I waited 10 years to finally get one. I followed it back in the days of Tommy Mak, in WRC. EVO IV and V days, then onto the EVO VI and Tommy's championships.

Just bought my 04, five days ago...grinning ever since!

I was actually browsing Ebay and they have a lot of conversion kits n stuff.

Anyways i meant i won't be rich enough for now. Im only 17 lol, n i don't feel like spending over 20k on my first real car. The reason I was considering a conversion kit is because a lancer is way cheaper. And over time, like in a period of over a year, i could spend money on upgrades one at a time, not spend 20k at once.

Driftflow, totaly understandable. And what control...Not wanting to spend the money out weighs the grins of the car...very good control indeed. :wink:

Interesting thought I had after posting earlier: Back in the day when the Gen 1 Eclipse premiered, it had 4 editions. The regular 1.8 2 wheel drive, 2.0 GS 2 wheel drive, 2.0 GST 2 wheel drive, and then the 2.0 GST AWD. Why did they not build the Lncer ES, OZ Rally, and then the EVO and EVO MR on the same platform, so that the body's were the same. Multitude of parts, and sharing the same motor for crimeny sakes....

My point is, I think Mitsubishi America screwed the pooch when bringing the Lancer and the Lancer EVO to the states. They could of dominated the Tuner Market. But these are same arguments that plagued us back in 03. :shakehead

On my 03 OZ Rally, I tried just about everything to get it to the level of the EVO, and at the time, there just wasn't that much. A kit car is cool and worth the respect for the dedication you may or may not put into it, but that's it, it's a kit car, and not an original. Who cares on the opininon of others here, it's whether or not you are ok with knowing, it just isn't the EVO.
And if you are, then thumbs up, and again, great control...:wink:

You'll spend more than $20k trying to turn a base lancer into an Evo.

blah

the drivetrain itself would be where most of your money will go

you going for looks or just a complete evo conversion

you have to remember to two main fact

I. The evo is mostly a hybrid car. It was pieced together when the first EVO I came out, wich had the 3000 GT's motor in it. It has grown since then

II. The Lancer is an economy car



If you pull it off, it'll be something like the beginning evo's. In your case if you go for a complete conversion, you'll have more chances to save weight and other such things

BUT

a less rigid body as well

The Evo did not have a 3000GT engine.

It had the engine from the Galant VR4, not the 3000GT.

corrected

haha, when i typed i was like wait, the evo never had a twin turbo V6. But blah, i was gonna edit it with more info later

Wasn't it always the 4g63 spec x...?

I have followed them for a long time, since the III or IV. I always thought it was the 4 cylinder turbo 4g63 of some sort.

don't know if it's always been called the 4g63, maybe III and up. Don't forget that it was still a prototype. Everything they did was just for fun/R&D


They even say the 4B11 won't stand up to the older 4G63's. Cast Iron > Aluminum?

lol, well yeah, thats true, but maybe somehow it can handle more boost

So if I understand right the front bumper is a bit wider? been googling this for awhile gave up looking.

So if I put the front side frams on from a evo will the front bumper from a evo fit better? I really want an evo front bumper and rear bumper. is it worth the work or will it just be better to do a different body kit.

second project car and so the smart a$$ comments and trolling would be nice somewhere else

So if I understand right the front bumper is a bit wider? been googling this for awhile gave up looking.

So if I put the front side frams on from a evo will the front bumper from a evo fit better? I really want an evo front bumper and rear bumper. is it worth the work or will it just be better to do a different body kit.

second project car and so the smart a$$ comments and trolling would be nice somewhere else

you can make a lancer look like an evo by transplanting evo body parts like fenders, skirts, hood, bumpers and the wing, but the evo has other modifications done to it such as additional welds which the regular guy won't bother doing. of course, you do have to add the evo's engine, suspension, brakes, transmission...

btw, what lancer (chassis code) will you be using?

you can make a lancer look like an evo by transplanting evo body parts like fenders, skirts, hood, bumpers and the wing, but the evo has other modifications done to it such as additional welds which the regular guy won't bother doing. of course, you do have to add the evo's engine, suspension, brakes, transmission...

btw, what lancer (chassis code) will you be using?

Ill be using a oz rally 03 I bought it and the front and rear bumper are dmgd so I wanted to know if I could bolt those on from the evo

you could, but the CT9A evo (evo7-9 where the oz lancer is related to) is wider so the bumpers will be wider than the rest of the car. you'll be forced to get the fenders too (front and rear) just to make it look okay.