Manual Tranny Swap

Ok, I just aquired 1,200 how much would it be to convert my auto tegra to manual and what do i need

You will need The tranny, clutch fluid reservoir , the line that run to the tranny from the clutch reservoir, clutch master cylinder, clutch slave cylinder if not connected to the donated tranny, pedal assembly, new ecu or you can take the ecu appart and remove the resistor from location RP17 and solder it into location RP18, not a must but a new gauge cluster, tranny mounts, not sure about the axles I think they are the same length some one correct me if I am wrong. That is all I can think of at the moment. It would be best to just get all this stuff off of the car you get the tranny from. Hope this helped:)