AMT F&F supra WIP

Guess this the best model amount the AMT F&F series. The body of the supra are generally in pretty good shape. The only problem are round edges in the front bumber and the side skirt. So wat I have done is sharpen the edges in the front bumber and the sideskirt (edge around the whole) with cutter :D

Body has been painted with 2 layer of flat orange yellow, then few layer of (transparent orange + purple pearl powder + ~ 10% flat base).

Will polish and spay another few layer of clear coat in few weeks time.

http://inlinethumb14.webshots.com/35277/2387955520087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2387955520087837450AFhAOR)

http://inlinethumb33.webshots.com/42784/2714328010087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2714328010087837450asOQLV)

http://inlinethumb24.webshots.com/35927/2471778030087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2471778030087837450UWLHzR)

http://inlinethumb37.webshots.com/42468/2233510140087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2233510140087837450IlAvmc)

decent start, now throw some clear on there

Here comes a little update for my supra. Accident happen again after I polish the body I found a very deep scratch on the top of the car, end up stripping down the whole car.

Here's my little experiment with nail polish, I use flat base as the base color, then orange mica nail polish and clear orange as the top coat.

http://inlinethumb35.webshots.com/33058/2183117440087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2183117440087837450nrGays)

http://inlinethumb35.webshots.com/25698/2198019890087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2198019890087837450kSisZu)

Scratch build the interCooler, intake manifold turbo and the piping

http://inlinethumb40.webshots.com/27495/2164339390087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2164339390087837450TyAgZY)

http://inlinethumb39.webshots.com/39462/2961560010087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2961560010087837450jPRHqz)

http://inlinethumb25.webshots.com/728/2695237060087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2695237060087837450aJrPrj)

http://inlinethumb26.webshots.com/26329/2142218260087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2142218260087837450jwMvHG)

http://inlinethumb35.webshots.com/39650/2234394260087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2234394260087837450WYPTbG)

I hope this is not as brown as it looks...
Seems to be a popular kit (again).
good progress.

Hi Everyone here's more update for my AMT Supra, guess this model is not everyone's choice. :wink: Personaly I don't think is that bad. But does need lots of patient to make it look gd

So here we go let's look athe engine first. Rebuild the intake and exhaust manifold with solder iron

http://inlinethumb05.webshots.com/41540/2686375160087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2686375160087837450QPNtcO)

Scratch build intercooler, turbo and air intake

http://inlinethumb41.webshots.com/42536/2619678700087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2619678700087837450wNcIzH)

http://inlinethumb17.webshots.com/20048/2516657550087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2516657550087837450DWJsun)
Here comes the interior, little mod with on the pedal the metal bit are from softdrink can and the red strip are masking tape painted red

http://inlinethumb33.webshots.com/43680/2278455870087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2278455870087837450AWJrtg)

http://inlinethumb29.webshots.com/40220/2015931390087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2015931390087837450nNsHOU)

http://inlinethumb34.webshots.com/41697/2899536650087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2899536650087837450sPBYoe)

http://inlinethumb57.webshots.com/14648/2022865240087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2022865240087837450rmkYfQ)

Test assembly the interior

http://inlinethumb26.webshots.com/10137/2920443470087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2920443470087837450JSVZvO)

http://inlinethumb26.webshots.com/10137/2920443470087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2920443470087837450JSVZvO)

http://inlinethumb43.webshots.com/42282/2741403170087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2741403170087837450ANaldg)

http://inlinethumb11.webshots.com/16970/2721652570087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2721652570087837450hpNSBm)

http://inlinethumb34.webshots.com/30817/2898168850087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2898168850087837450SJCmfS)

http://inlinethumb54.webshots.com/39797/2732497670087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2732497670087837450WDKuuN)

http://inlinethumb07.webshots.com/25862/2277222040087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2277222040087837450TSxNWO)

http://inlinethumb43.webshots.com/35114/2775898480087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2775898480087837450SFCjsY)

http://inlinethumb30.webshots.com/25885/2970107380087837450S600x600Q85.jpg (http://entertainment.webshots.com/photo/2970107380087837450dfyOch)

thx :)

Can i Just Ask?
how did u get the yellow 2 turn out good did u airbrush or spray
cheers bro.

Im curious about that too. Every time I try to paint with yellow, it looks pretty ugly. Im working on an AMT F&F Supra as well, but not this one. Your's looks great.

Maybe this will motivate me to post mine. :)

alex.

Hi Guys, I airbrush most of my parts.
Do you mean the yellow in the interior?
I use Mr Hobby acrylic most of the time. And I always mix them with flat base. The reason for this is glossy colour are more transparent than flat colour.

In my experience red and yellow are pretty nasty colour(they are relatively weak in terms of masking other colour). And most of the time the base colour will affect how it appear.

Hope it helps

i Airbrush sometimes buht im not the Best!
im not the best at mixing the thinner with the paint lols
i might airbrush the floor flat black and brush the flat yellow
i dunno well my fnf supra i want the yellow and black theme exacly the same as yours buht flat and im thinking the body tamiya racing blue
cheers mate!

I would airbrush the yellow as well, as mentioned previously yellow has a relatively low masking ability, you might end up having a thick layer if you brush it on.

In terms of mixing, i usually use 1:1 - 1:2 paint to thinner ratio. PM me if you need help with airbrush cheers mate

Looks good, i actually like the darker orange than the bright one. Keep us posted. I got one of these in my stash and it got pushed in baCK of every other models.