need tips on cutting out body panels
Re037
03-03-2003, 02:07 AM
trying to remove the pop up lights on a fujimi 180sx for the "lazy eye" look. any ideas besides an exacto knife? trying to get a thin cut btw
GTi-VR6_A3
03-03-2003, 02:15 AM
x acto is best bet
you can heat it up for a little better kutting i have found. but you must be careful of distorting the plastic. its a really hard method
-GTi-VR6_A3
you can heat it up for a little better kutting i have found. but you must be careful of distorting the plastic. its a really hard method
-GTi-VR6_A3
patate
03-03-2003, 10:36 AM
two word
sewing tread
it make clean cutting lines
sewing tread
it make clean cutting lines
Geez
03-03-2003, 10:41 AM
Originally posted by patate
two word
sewing tread
it make clean cutting lines
Please explain:
-tread or thread?
-how is it executed?
two word
sewing tread
it make clean cutting lines
Please explain:
-tread or thread?
-how is it executed?
freakray
03-03-2003, 10:52 AM
Do a search on this, flyonthewall wrote a how to on removing hoods and doors.
There is a good chance it is even in the FAQ
There is a good chance it is even in the FAQ
Midnight Racer
03-03-2003, 11:35 AM
Originally posted by freakray
Do a search on this, flyonthewall wrote a how to on removing hoods and doors.
There is a good chance it is even in the FAQ
You are correct FOTW did a tutorial and I used for the PT I'm currently working on.It can be found here http://www.briansmodelcars.com/tutorials/pdf/4.pdf
Do a search on this, flyonthewall wrote a how to on removing hoods and doors.
There is a good chance it is even in the FAQ
You are correct FOTW did a tutorial and I used for the PT I'm currently working on.It can be found here http://www.briansmodelcars.com/tutorials/pdf/4.pdf
primera man
03-03-2003, 12:38 PM
Re037
03-03-2003, 01:33 PM
sweet, thanks. now off to go cuttin'
Automotive Network, Inc., Copyright ©2025