how can i have my 94 z28 go faster ?
speeder94
03-02-2003, 03:17 PM
can i put some 320 horses for under 1000$ dollars in my z28.
Pick
03-02-2003, 03:18 PM
New intake manifold, carb, exhaust. That might go over, however.
Self
03-04-2003, 07:50 AM
Seeing as how you're putting down right around 300rwhp now, that's not a very big deal...Intake and exhaust will do the trick. If you're looking for the most power you can possibly get for under $1000 though, go for a nitrous setup, or exhaust and a cam.
Gripenfelter
03-05-2003, 12:31 PM
Airlid.
3.0" Exhaust.
Exhaust cutout.
for your LS1.
Hooker Longtubes and a 3.0" exhaust for your 94 Z28.
3.0" Exhaust.
Exhaust cutout.
for your LS1.
Hooker Longtubes and a 3.0" exhaust for your 94 Z28.
Scott 02
03-06-2003, 06:50 AM
I'd do exhaust work first. Headers,Cat,Flowmaster 80series.
Spyk
03-15-2003, 09:47 PM
Cheaply
a homemader amair(copythek7n) timingtricker
catremoval
52mm & airfoil tb used matches the intake plenum
spintech or magaflow..pipinge size is fine stock
gears.and nitto
sytheticpacksndnitos..it may cost a bititbutboy withid wke i up
hypertectech worked well in 94w/160thermo..most ofthese part are easily found usedtry ebay or lt1.com
you'llankme ...if its an auto DONT go higher thsnn 3.73
a homemader amair(copythek7n) timingtricker
catremoval
52mm & airfoil tb used matches the intake plenum
spintech or magaflow..pipinge size is fine stock
gears.and nitto
sytheticpacksndnitos..it may cost a bititbutboy withid wke i up
hypertectech worked well in 94w/160thermo..most ofthese part are easily found usedtry ebay or lt1.com
you'llankme ...if its an auto DONT go higher thsnn 3.73
Misundaztood
03-16-2003, 07:12 PM
I'm almost positive you could hook yourself up with a 50-shot nitrous kit for a grand or cheaper. I dunno, correct me if I'm wrong.
Ace$nyper
03-23-2003, 09:22 PM
cat back + intake you should be over your goal and under a grand
Scott 02
03-24-2003, 11:38 AM
I know that camaro's have a cross flow muffler to make duels out the back, but can you run duels from the headers back on 94+ Camaros?
TexasF355F1
03-24-2003, 01:08 PM
My uncle just sold his 94 Z28 for a new vette. But his Z ran 12.9 in 1/4, oh yea and its an auto. I dont remember everything he had, but from what I do, he had, headers, borla cat back, power programmer, upgraded ignition, and i think new throttle body. Not sure if all of this was on the car but it sounded sweet, and looked like a completely stock Z28.
Chevyracincamaro
10-16-2003, 12:58 AM
first of all sorry but you dont have 300 rwhp, you lose up to 20% of horsepower through the drivetrain so 320 at the wheels for under a grand might be a long shot. but intake exhaust manifold throttle body, headers. if you want that much power your gonna need to dish out way more than a grand
AtlasEngr
10-16-2003, 07:24 AM
Precision Industries Torque Converter. At least 2800 stall. You will feel the power and not have to be adding parts that will be giving you 10-20 horspower for the same $ amount. They run about 700.00 dollars but boy will you get the power you are craving!
BlkCamaroSS
10-16-2003, 09:57 AM
You're kidding me, a seven month old thread???
AtlasEngr
10-16-2003, 10:03 AM
He might still be saving up for the 1K! You never know. But, somebody might have the same question as he did---and he might use the info.
BlkCamaroSS
10-16-2003, 11:23 AM
It's possible, but his profile says his last post was a month and a half ago, and he's never responded to this thread...
Automotive Network, Inc., Copyright ©2026
