6 bolt swap help

I am swaping a 90 6 bolt into my 99 gsx and i need help with the wiring of the cam sensor. and what all sensors do i need form the 7 bolts. or can i use the old ones. i just finished rebuliding the 6 bolt and need it in fast thaxn help me out please :popcorn::banghead:

Road Race Engineering has a plug and play harness for the CAS that is very nice. All you have to do is tap the white wire from it into your Crank angle sensor harness and it's good to go... Give them a call on the number on their website and they'll know exactly what you need.

As for sensors from the 7 bolt, I would suggest keeping most of them on standby just so you have them if you need to use them. With your 6 bolt being freshly rebuilt, I would put all new sensors in it. :2cents:

If you can solder and can follow directions and look at a diagram there is a write up and diagram by road race to wire the 1g CAS in a 2g car.. (http://vfaq.com/index-main.html) http://www.roadraceengineering.com/1gcasin2g.htm (http://www.roadraceengineering.com/1gcasin2g.htm) Its really not difficult.. you can do it in less than 5 min.

also check out vfaq.com its your friend.. tons of useful dsm info there.

MOD ...please delete this.. it was a duplicate post.. Thanks