Keyless entry problem
richandrz
03-31-2008, 08:27 AM
Greetings,
My original keyless entry remote stopped working so I replaced the battery and it still didn't work. The contacts under the buttons are worn away and I have two questions to ask.
1) Is there any place online that sells just the rubber gasket/buttons piece.
2) Are the black contacts under the buttons metallic to make contact to the circuit board?
Thanks,
Rich
My original keyless entry remote stopped working so I replaced the battery and it still didn't work. The contacts under the buttons are worn away and I have two questions to ask.
1) Is there any place online that sells just the rubber gasket/buttons piece.
2) Are the black contacts under the buttons metallic to make contact to the circuit board?
Thanks,
Rich
dtownfb
03-31-2008, 11:02 AM
I'm assuming you followed the re-programming instructions in the owner's amanual already????
richandrz
03-31-2008, 11:15 AM
The original still works if I use a coin to short the keypad on the remote, that's why the ? on the metallic button.
I did buy a refurbished remote online and I cannot program that one. When I opened it up it was filthy and the replacement rubber keys had no gasket around the case like the original, if I can buy the entire rubber button part I'd replace both.
Now that you mention it, the programming instructions from the replacement doesn't work and I never saw instructions for the 2000 Intrigue online. I used the instructions for other years and I get the three tones to program, but never get the two confirmation tones, I'm assuming the replacement remote is bad. Does 1999 or 2001 programming work on the 2000?
I did buy a refurbished remote online and I cannot program that one. When I opened it up it was filthy and the replacement rubber keys had no gasket around the case like the original, if I can buy the entire rubber button part I'd replace both.
Now that you mention it, the programming instructions from the replacement doesn't work and I never saw instructions for the 2000 Intrigue online. I used the instructions for other years and I get the three tones to program, but never get the two confirmation tones, I'm assuming the replacement remote is bad. Does 1999 or 2001 programming work on the 2000?
Automotive Network, Inc., Copyright ©2025