Lancia Stratos Zero

Pages : 1 [2] 3

guysmilie

11-27-2008, 03:31 PM

:eek2::eek2::eek2::eek2::eek2: Can't say it any better, this is awesome.

360spider

11-27-2008, 09:46 PM

The ruler sure gives a perspective...Just by looking at the cover you think...hmmm, ok, a cover, and then bang! -you realize how small it is!

tuned.by.twenty

11-27-2008, 10:45 PM

Seeing this thread has given me ideas...I wonder if my parents will accept an addition to my Christmas list? :grinyes:

jaykay640

11-28-2008, 06:45 PM

Wicked! I sure should have a look in the Street section more often. That's one not to be missed!
Gandini rules and it looks like you are going to do his design justice!
Everyone, just think about the cars that were on the road at the time this was created...pure SciFi!
Much has been said about your approach to modeling and the envy expressed! You desrve it:-) I would like to have those tools but on the other hand i don't envy the time you ( or your brother :-) spend in front of the computer. It takes a lot of time until you get a part. At my job i get to torture poor CAD guys every day with stuff they have to model for me. They need time and they are pro's! I wouldn't wanna be in their place but i'm itching to try this myself...gotta learn that damn 3D-software.....
I'll definitely follow this from now on:-)

stratos75

11-30-2008, 08:17 PM

Thanks to all!
This weekend I did anew the front part of the seats, because with getting of new photos I saw that the previous was not correct. So at now I'm satisfied.
The new part till not cutting (in the centre).
http://img-fotki.yandex.ru/get/3106/mikhailpetrenko.3/0_20073_f305287a_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/131187/)

The previous version of the seats.
http://img-fotki.yandex.ru/get/3301/mikhailpetrenko.3/0_20074_f2af8d82_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/131188/)

And now.
http://img-fotki.yandex.ru/get/2709/mikhailpetrenko.3/0_20075_4434800e_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/131189/)

Reference.
http://img-fotki.yandex.ru/get/3300/mikhailpetrenko.3/0_20076_56298c0f_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/131190/)

mrawl

12-01-2008, 05:16 AM

This continues to be one of the most interesting things I've ever seen! I'm curious though, the real seat appears to have 9 panels top to bottom, yours has 7. Clearly you could have modeled this perfectly, any reason for the difference?

jano11

12-01-2008, 07:32 AM

I'm curious though, the real seat appears to have 9 panels top to bottom, yours has 7. Clearly you could have modeled this perfectly, any reason for the difference?

I think it has 10 with the one at top that is in the darker upper part.

stratos75

12-01-2008, 06:25 PM

I think it has 10 with the one at top that is in the darker upper part.
Yes! You can to count, but you aren't attentive. Look at my previous fotos and you will see all parts of the seats. In the latter case I've shown the rebuilt part only. I remind you as it looks now (without the left panel to better view):

http://img-fotki.yandex.ru/get/3107/mikhailpetrenko.3/0_20119_723e8b5_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/131353/)

jano11

12-02-2008, 02:33 AM

Yes! You can to count...

Thanks for the compliment! :wink:

gionc

12-02-2008, 06:24 AM

Fantastic so far!

Looks like this project fix at all my problem to do one for myself and to sell, I'll buy a couple for me (one orange and one silver ;) ) and leave you to sell all you want ;), too busy with other project lately, but more than happy to see so great updates. BRAVO!

360spider

12-02-2008, 09:15 AM

Superb craftsmanship!

mrawl

12-02-2008, 09:54 PM

Lol, I knew you'd have a perfect answer on the seat thing. Do you break parts up in order to make tooling easier? But then something like the steering wheel - that has to be remounted and tooled from both sides?

stratos75

12-03-2008, 01:34 AM

...Do you break parts up in order to make tooling easier? But then something like the steering wheel - that has to be remounted and tooled from both sides?
Yes, I do. You are right, if some parts needs to mill both sides I remount they and tool each side. But some parts I force to break and rotate to 3D milling.

rollin80s

12-03-2008, 02:58 PM

wow, this is amazing:eek2:keep up the great work.:evillol:

b00mslang

12-13-2008, 07:26 PM

Are you planning to offer the 3d modeling files for sale?

stratos75

12-14-2008, 09:09 AM

Are you planning to offer the 3d modeling files for sale?
I don't want to sell it at a low price yet.

b00mslang

12-14-2008, 04:23 PM

I was thinking of the current prices listed at TurboSquid, etc. $150 plus?

I am not interested in competing on the model level. I would be using the files to setup bulkheads and wireform buck for a full-size aluminum copy. (for myself and not for resale)

This would just save me the work of modeling it.

TIA

Hiroboy

12-21-2008, 05:46 PM

Awesome work

Philmodelcar

04-15-2009, 04:36 PM

why selling the data, why don't you cast and sell complete kits ?
I'll be a good customer :)

gionc

04-16-2009, 03:39 AM

Man,
we got to discuss that in past. This is a subject I want to do, I started to design the body shell but I'm quite back compared your actual stage.
More, looks me stupid create competition (also if competition help quality..) between us: this wouldn't be a Scuderia's project: all I'll offer is a full partnership, where we share profits. On the other side I'm not interested to buy 3D data, I have partially and not problem to finish: it would be just a cool adventure together. If the idea looks you cool, contact me, you shoud have mail somewhere, now, after some Scuderia's and freelance experiences I'm more ready to do something like it.

Not to mention... 1/12 and 1/43 scales... ;)

I wait for you :D

stratos75

04-16-2009, 03:23 PM

gionc

04-17-2009, 05:50 AM

I took a small time-out because of a new job, and now haven't enough free time for my hobby :(
Gio, I received some new interesting photos of engine bay and underbody from Bertone. I may to send they to you if you want.

Would be cool, I have few busy days in front than I'll contact you by mail to discuss if we'll do something together ;)

stratos75

06-02-2009, 05:05 PM

Something new on my project: the first primer.
http://img-fotki.yandex.ru/get/3503/mikhailpetrenko.e/0_29e4d_d1e1c8d2_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/171597/)
Посмотреть на Яндекс.Фотках (http://fotki.yandex.ru/users/mikhailpetrenko/view/171597/)
http://img-fotki.yandex.ru/get/3502/mikhailpetrenko.e/0_29e4e_5700d058_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/171598/)
Посмотреть на Яндекс.Фотках (http://fotki.yandex.ru/users/mikhailpetrenko/view/171598/)
http://img-fotki.yandex.ru/get/3602/mikhailpetrenko.e/0_29e4f_1fefe421_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/171599/)
Посмотреть на Яндекс.Фотках (http://fotki.yandex.ru/users/mikhailpetrenko/view/171599/)
http://img-fotki.yandex.ru/get/3500/mikhailpetrenko.e/0_29e50_14008c9f_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/171600/)
Посмотреть на Яндекс.Фотках (http://fotki.yandex.ru/users/mikhailpetrenko/view/171600/)

gtziaf

06-03-2009, 06:35 AM

Nice Shape!!!
Go on... and good luck until the finish...

btdada

06-03-2009, 07:30 AM

man...this is crasy

jano11

06-03-2009, 08:00 AM

Impressive result!
You did such a great job producing this body shell, it's really impressive. :thumbsup:

RetroFuturist

07-14-2009, 03:11 PM

I saw this car (the Zero) on eBay for sale. It is not as good quality (no interior or anything) as yours Stratos75:), but it still looks pretty cool. I started one for myself from scratch, but it is taking forever:banghead:.

Check it out: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140332502794

snk33y

07-15-2009, 02:30 AM

Wow! Fantastic workmanship...not the most apealing looking car but I can appreciate the work and skill that has gone into this.I'm sure this will grow on me, keep up the good work

stratos75

02-13-2010, 02:53 PM

tgn

03-07-2010, 01:08 AM

Model car team DON’S

Ｗｅ　ａｌｓｏ　ｍｅｄｅ　STRATOS　ZERO．

http://www.don-s.org/

Ｗｅ　ｗｉｌｌ　ｓｈｉｐ　ｉｎｔｅｒｎａｔｉｏｎａｌｌｙ．

Wolf95

03-07-2010, 11:26 AM

Woooow

360spider

03-07-2010, 07:06 PM

model car team don’s

Ｗｅ　ａｌｓｏ　ｍｅｄｅ　stratos　zero．

http://www.don-s.org/

Ｗｅ　ｗｉｌｌ　ｓｈｉｐ　ｉｎｔｅｒｎａｔｉｏｎａｌｌｙ．

spam!

Laucen

10-11-2010, 06:27 PM

stratos75

10-12-2010, 06:45 PM

Hi !

I'm looking for this model for a long time... I can't find this on shops...
Did you built other pieces ?
Is it possible to buy you some ?...

Please tell me how I can reach this...

Thank you very much for your help...
I'm waiting for your answer...

Laucen

I'm sorry for the long-long time out. I need a motivation to continue the works. Today, I don't need previous bodyshell, because I have the new one made of acryl resin and grew up on the 3D-printer. But it needs to do some works to reduce the thickness of the new body, and then... Be patience.
http://img-fotki.yandex.ru/get/4902/mikhailpetrenko.17/0_495a8_75d369b7_L.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/300456/)
Посмотреть на Яндекс.Фотках (http://fotki.yandex.ru/users/mikhailpetrenko/view/300456/)

However, you can try to buy the same kit from this site http://www.don-s.org/ It looks not bad, IMHO.

Laucen

10-13-2010, 07:02 AM

I'm sorry for the long-long time out. I need a motivation to continue the works. Today, I don't need previous bodyshell, because I have the new one made of acryl resin and grew up on the 3D-printer. But it needs to do some works to reduce the thickness of the new body, and then... Be patience.
http://img-fotki.yandex.ru/get/4902/mikhailpetrenko.17/0_495a8_75d369b7_L.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/300456/)
Посмотреть на Яндекс.Фотках (http://fotki.yandex.ru/users/mikhailpetrenko/view/300456/)

However, you can try to buy the same kit from this site http://www.don-s.org/ It looks not bad, IMHO.

Many thanks for your reply...
Ok, I'll wait... Tell me when it's done !!
Good luck for your work... :-D

Bye

Laucen

George Manont

01-04-2011, 04:47 AM

Hi Michail,

I'm no expert in building model, rather a 1:1 type. But your work is fantastic.

Keep up the good work and ALL the very best to you & your project.

Cheers,

GM.

.

corvettekid_7684

10-25-2011, 11:46 PM

Incredible

jaxson

10-27-2011, 02:04 AM

Wow....this is truely a work of modelling art

spaceratk

11-17-2011, 12:01 PM

This is officially one of the coolest things. Amazing work!

stratos75

11-17-2011, 03:24 PM

Thank you, guys!
And excuse me for the long timeout. I promise to continue scratchbuilding soon. Now I only put the first layer of a primer.
http://img-fotki.yandex.ru/get/4420/14224223.26/0_64751_af0a1e14_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/411473/)

kaho

11-18-2011, 04:44 AM

Awesome one-off build. How I wish I have a 3D printer and the skills involved in making an accurate CAD model of an actual car. :worshippy

scorpiopab

11-27-2011, 08:33 AM

Awesome one-off build. How I wish I have a 3D printer and the skills involved in making an accurate CAD model of an actual car. :worshippy

Who woudn't wish that??

Awesome building skills imho.

Just sick looking models you have made..

Paul.

5spdstang

01-20-2012, 10:47 PM

Unreal...simply astounding.

idgeek

02-05-2012, 08:27 AM

Great stuff!!
I, for one, also believe this is the direction this hobby is going as well.

just out of curiosity, if you start selling copies of this models, wouldn't there be licencing issues with Lancia??

Scolopendra

02-05-2012, 02:10 PM

just out of curiosity, if you start selling copies of this models, wouldn't there be licencing issues with Lancia??

It will

stratos75

11-13-2013, 07:22 PM

Let's continue.
The windscreen.
http://img-fotki.yandex.ru/get/6716/14224223.38/0_87421_5c32adcf_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/554017/)

http://img-fotki.yandex.ru/get/9229/14224223.38/0_87420_61bb3d4d_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/554016/)

The tires. These are the resin copies from this (http://fotki.yandex.ru/users/mikhailpetrenko/album/139347/)kit.
http://img-fotki.yandex.ru/get/9155/14224223.38/0_87319_f4030ec0_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/553753/)

The wheels.
The 3D model of the front wheel.
http://img-fotki.yandex.ru/get/9225/14224223.38/0_87423_d61ebdac_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/554019/)

http://img-fotki.yandex.ru/get/9163/14224223.38/0_87422_2eb80d6d_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/554018/)

And finally the front and the rear wheels from 3D printer.
http://img-fotki.yandex.ru/get/4900/14224223.3c/0_90ce0_54f0390c_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/593120/)

JeremyJon

11-13-2013, 09:13 PM

Glad to see more work on this Mikhail, great project!

Who do you use for 3D printing there?

Umihito

11-13-2013, 09:14 PM

OMG....:eek2: What a... you are the master. Dream modeling.

stratos75

12-09-2013, 10:52 AM

Little update.
I've made the tire for the front wheel. It was made by means of decreasing of the resin copy, which I put on the left to compare. It was not so easy, because the resin copy was strong enough.
There is the process.
http://img-fotki.yandex.ru/get/9759/14224223.3d/0_91ac9_4b279705_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/596681/)

http://img-fotki.yandex.ru/get/9493/14224223.3d/0_91ac8_d9b2ee1_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/596680/)

http://img-fotki.yandex.ru/get/9508/14224223.3d/0_91aca_77d66541_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/596682/)

http://img-fotki.yandex.ru/get/6708/14224223.3d/0_91acb_b921f485_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/596683/)

http://img-fotki.yandex.ru/get/9756/14224223.3d/0_91ace_70b65946_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/596686/)

nugundam93

12-09-2013, 12:04 PM

amazing work as usual!

Deathtrap

12-09-2013, 12:45 PM

You must have heard this many times before, but I've read your topic from the beginning and enjoyed every part of it. Succes during the remainder of the build and keep us posted.

willimo

12-11-2013, 12:22 AM

How did you soften the resin enough to decrease the radius of the tire?

stratos75

12-11-2013, 03:05 AM

It was softened in a hot water (100ºC). But it was not enough to fix the result. Then the tire was inserted into a round holder and heated again by means of lamp bulb. Only after that the tire has remembered its new shape. Then a seam was glued by cyanoacrylate.

scorpiopab

12-11-2013, 03:09 PM

:eek2::eek2::eek2: wow.

MauF

01-06-2014, 12:15 AM

Taking car modeling to a new, awesome level. Congratulations.

stratos75

01-18-2014, 05:27 PM

I decided to make soft tires. Only five sets.
http://img-fotki.yandex.ru/get/9836/14224223.40/0_941c2_f5ab2247_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/606658/)

http://img-fotki.yandex.ru/get/9836/14224223.40/0_941c3_51f3f2d5_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/606659/)

http://img-fotki.yandex.ru/get/9113/14224223.40/0_941c1_b9ae042d_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/606657/)

http://img-fotki.yandex.ru/get/9113/14224223.40/0_941c0_50643e8c_XL.jpg (http://fotki.yandex.ru/users/mikhailpetrenko/view/606656/)

mrgixxer

01-19-2014, 07:11 PM

love it

nugundam93

01-20-2014, 04:01 AM

wow. so that's how you did the tires :)

Pablo13

02-17-2014, 07:34 AM

I decided to make soft tires. Only five sets.
Can you share with us the information of what and how you casting these tires?
Himself also experimenting with the performance of the soft tires in order to add greater realism of models. Therefore, any comments and experiences are very precious to me.
What form do you perform one-piece?
I'll be very grateful if you answer :)

stratos75

02-17-2014, 10:16 AM

Pablo13: These copies were made for me by my friend. He is a very experienced man. He is used products of the Axson company (don't remember which exactly, probably UR 3450: http://www.axson-technologies.com/en/find-product/Casting-Resins/Casting-Polyurethane-Elastomers).
He is used also vacuum technology that gives a superb quality of casted parts.
Hope it helps you.

By the time I have ordered new prototypes for the rims and the upper gills. They are very expensive, but fine. Soon I will show them.

Add your comment to this topic!

Quality Real Meat Nutrition for Dogs: Best Air Dried Dog Food | Real Beef Dog Food | Best Beef Dog Food

Our Community is over 1 Million Strong. Join Us.

Lancia Stratos Zero