Are these mounts all I need?, (97 GSR b18c1 into 94 civic hatch)

I found these mounts on ebay and they say they have a lifetime warranty so I figure they can't be that bad.
Anyways, I don't have any of the mounts from the donor integra. I am planning a full axle to axle swap from a 97 GSR into a 94 civic hatch. Are these three pieces all I will need to get it done? Thanks.
(http://cgi.ebay.com/ebaymotors/B-Series-Del-Sol-Civic-EG-Integra-Motor-Mounts-B16-B18_W0QQitemZ310031037732QQihZ021QQcategoryZ50454Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem)
http://cgi.ebay.com/ebaymotors/B-Series-Del-Sol-Civic-EG-Integra-Motor-Mounts-B16-B18_W0QQitemZ310031037732QQihZ021QQcategoryZ50454Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem

Check out your engine and make sure you have a 3 stud drivers' side mount bracket attached to the engine, and not a 2 stud bracket. Personally I wouldn't buy those though. That drivers' side mount looks like crap, and I wouldn't trust it to hold regardless of the lifetime warranty or not. You could just go to a local junk yard and try to get a matching Integra drivers' side mount (2 hole or 3 hole), you could use the rest of the stock Civic mounts. You're also going to need an Integra rear mount bracket. If you have A/C and want to keep it, you're going to need a Del Sol VTEC (the one with the B16) A/C bracket.