villager head
manjdemps
03-12-2008, 06:20 PM
head will not seperate from block. all bolts etc. removed
tempfixit
03-12-2008, 08:59 PM
What year vehicle.
Which head, left or right bank?
Which head, left or right bank?
tempfixit
03-12-2008, 09:38 PM
No disrespect mean't by this question> Did you take timing belt off?
manjdemps
03-13-2008, 02:27 PM
What year vehicle.
Which head, left or right bank?
it's a 1995 mercury villager left or rear head (engine is side mounted)
Which head, left or right bank?
it's a 1995 mercury villager left or rear head (engine is side mounted)
manjdemps
03-13-2008, 02:29 PM
No disrespect mean't by this question> Did you take timing belt off?
timing belt and all bolts i could find is off
timing belt and all bolts i could find is off
tempfixit
03-13-2008, 10:37 PM
Do you have a manual? I assume you tried using a bar and putting it in one the intake ports and giving it a tug, lot a times the gasket sticks to the block and the head causing hard removal.
If to don't have a manual look in the free online service manual maybe there is something you missed, its happened to me a number of times.
Send me a PM with your email addres and I can send you some info that might help.
If to don't have a manual look in the free online service manual maybe there is something you missed, its happened to me a number of times.
Send me a PM with your email addres and I can send you some info that might help.
tempfixit
03-13-2008, 10:59 PM
Looking at the online service manual, it shows a head bolt outside of the head, to me it looks like it is on the drivers side bottom of head. Should be a total of 14 head bolts. Manual also states NOT to use existing head bolts, all bolts and washers are to be replace with new.
tempfixit
03-15-2008, 08:04 AM
Any luck getting head off??
Automotive Network, Inc., Copyright ©2026