Best scale racing harness?

I searched but I didn't find the answer I need...

I'm looking to buy some PE seat belts hardware for my future projects, I've never used them before so I'm not sure which ones are the best quality and value for the money. I've searched on HLJ and found the Model Factory Hiro (http://www.hlj.com/product/MFHP925) for $13, the Acustion (http://www.hlj.com/product/ACS8355) for $17, and SMS (http://www.hlj.com/product/SMSSM8122) also for about $17.

I am going to be using these harness sets for F1, rally and touring cars. Those of you who have had experience using some of these sets, which ones are easier to use and looks the best? How many seats can the MFH and Acustion do? (I know the SMS can do only 2 seats). Any where else offer a cheaper or better alternative than the ones I mentioned? I would also prefer to order these domestically if possible.

Thanks in advance for the help! Sorry for so many questions. :redface:

i have several PE buckles for harnesses(no belts, and i dont know where these buckles came), and for the belt itself i use either ribbon, painted tape or vynil tape. :D
HTH

I bought some 3mm ribbon from the crafts store some time ago for 50 cents a roll that looks perfect for miniture seat belts. All I really need is the PE hardware. Problem is, they cost many times more than 50 cents. :(

I bought some 3mm ribbon from the crafts store some time ago for 50 cents a roll that looks perfect for miniture seat belts. All I really need is the PE hardware. Problem is, they cost many times more than 50 cents. :(

If you have the ribbon this is what you need

http://pedetails.com/2/index.php?target=products&product_id=29872

for rally car

this

http://www.hiroboy.com/catalog/product_info.php?products_id=139

not bad for 1/20 F1 but new AcuStion is better http://www.mediamixhobby.com.sg/catalog/product_info.php?currency=EUR&cPath=1_9_25_61&products_id=5526

This one is also good

http://www.mediamixhobby.com.sg/catalog/product_info.php?cPath=1_6_21_62&products_id=5277

it is huge and not so much money.

This two are good and cheap
http://www.mediamixhobby.com.sg/catalog/product_info.php?cPath=1_6_21_62&products_id=603
http://www.mediamixhobby.com.sg/catalog/product_info.php?cPath=1_6_21_62&products_id=601

Thanks for your help! I think I will get the set for Rally cars and the Acustion set. Will the Acustion set be accurate for GT cars (DTM, JGTC) as well?

edit: and also, how many seats can the Acustion set do?

Thanks again! :)

Acustion F1 set provides you with 2+2 sets (so 2 different looking buckles).

For 1/24 GT I would take KA big set or Reji or CM since they have a lot of decals even with JGTC sponsors. http://www.mediamixhobby.com.sg/catalog/product_info.php?cPath=1_6_21_62&products_id=4006