North's 1995 Sixer AWD

I like this thread, thanks for keeping us up with pics.

Whew! Brakes and Suspension are done! Now All I have to do is adjust the height
Dirty
http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_0694.jpg
Clean!
http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_0697.jpg
Back shot. Issue with Aftermarket Rotor so stock will have to do
http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_0700.jpg
Front w/ Aftermarket Rotor
http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_0706.jpg
http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_0704.jpg

Evo 8 Steering wheel Installed
FMIC Installed
Pics up when I get it back together.

Nice. But those tires are doo doo. I have them and they dont handle worth a damn.

Don't really care on how well they handle. I'm using them for 1/4 runs and thats about it.

Went to a new spot and tried it out.
Still in construction stage but I'm sure it will be sick when its done.

1.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0786.jpg
2.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0788.jpg
3.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0790.jpg
4.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0793.jpg
5.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/James.jpg
6.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0806.jpg
7.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0815.jpg
8.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0816.jpg
9.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0819.jpg
10.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0826.jpg
11.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0830.jpg
12.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0833.jpg
13.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0835.jpg
14.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0841.jpg
15.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0821.jpg
16.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0843.jpg
17.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_0845.jpg


Bare with me since I haven't taken a photo since Turkey Break.
Also. Just got the FMIC on yesterday!
13 vac at idle and 21 vac under compression breaking with the 272 cams and brand new motor. w00t

Nice pics. Some look fake. You need to lose those flames on the Eclipse. I think that ruins the clean look of the car in these pics.

Nice pics. Some look fake. You need to lose those flames on the Eclipse. I think that ruins the clean look of the car in these pics.

LOL, I agree dave. Don't know what the flames do, it may look better if they were a totally different color that stood out IMO.

Nice pics. Some look fake. You need to lose those flames on the Eclipse. I think that ruins the clean look of the car in these pics.
I'm going to take that as a Compliment since I don't do Photoshop. I think its cool and all but ruins the spot of the moment shot, so no I do not photoshop.


GHOST FLAMES WERE NOT MY IDEA. IT CAME THAT WAY AND I'M Repainting it ONE COLOR!!!!:runaround::runaround::runaround:

Nice pics.. Where'd you take those at?

Awesome location for photos.

I'm going to take that as a Compliment since I don't do Photoshop. I think its cool and all but ruins the spot of the moment shot, so no I do not photoshop.


GHOST FLAMES WERE NOT MY IDEA. IT CAME THAT WAY AND I'M Repainting it ONE COLOR!!!!:runaround::runaround::runaround:

Oh that is a compliment. It looks very pro and like it's almost not real. Like large toys in a fake set or something. Looks very awesome!

*Updated*
Got All the goodies in
Just ordered a JM Fab OverFlow Tank
http://www.maperformance.com/store/product.php?productid=17509&cat=0&page=3
Here is a Engine Pic. Kudos to Kevin for the piping!
http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_0851.jpg
Home Depot Fabrication. Yes Redneck I know but money pwns me and It holds Boost/Vac like you wouldn't believe.
It has Been Reinforced with RTV and a Smaller Coupler to insure vacuum
http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_0853.jpg

LOL, awesome plug cover. What are you using the PCV for, I couldn't make it out.

LOL, awesome plug cover. What are you using the PCV for, I couldn't make it out.

IC pipe coming off the J-Pipe to FMIC. In the pic, you're looking at the front of the car, block behind it.

I thought so because of the boost/vac comment. Nice, redneck remedy LMFAO. Awesome.

Pimpin plug cover. Yeah and about the PVC piping, we're turboing our 88 dodge 4x4 dakota, and we're going to make all the boost piping out of PVC piping.

Pimpin plug cover. Yeah and about the PVC piping, we're turboing our 88 dodge 4x4 dakota, and we're going to make all the boost piping out of PVC piping.


I highly doubt that will work. I think it will get weak from the heat and bust.

I highly doubt that will work. I think it will get weak from the heat and bust.
Not if you properly Isolated it from the Heated source. ie Heat Shield, Heat Wrap and such. But I'm a little ashamed of the PVC but it works and it is holding great. :banghead:

We're gonna try it, I have mad faith in the PVC piping. That crap pretty hard to bust. They're made to handle alot of pressure.

i would like to see that evo steering wheel... ;) you hook the airbag up? i was looking into this because i HATE how big the stock wheel is, but i need an airbag... ;) safty first! love the pic with the DSM flicking off the chevy... maybe a new desktop background in order... :1:

i would like to see that evo steering wheel... ;) you hook the airbag up? i was looking into this because i HATE how big the stock wheel is, but i need an airbag... ;) safty first! love the pic with the DSM flicking off the chevy... maybe a new desktop background in order... :1:
No I do not have the airbag hooked up. I'm fine without it. now that over the Stock wheel any flipping day of the week! OMG the difference is sooo huge, its magical. I thank everyday to the DSM gods for using that wheel. Its worth the money trust me.:iceslolan:grinyes:

No I do not have the airbag hooked up. I'm fine without it. now that over the Stock wheel any flipping day of the week! OMG the difference is sooo huge, its magical. I thank everyday to the DSM gods for using that wheel. Its worth the money trust me.:iceslolan:grinyes:
yeah... BUT! i need the airbag... :banghead: how did you do it? using a 1g wheel to cut? or did you use the 2g???

http://www.dsmtuners.com/forums/articles-parts-fabrication/273299-evo-steering-wheel-dsm.html
Everything you need to know.

We're gonna try it, I have mad faith in the PVC piping. That crap pretty hard to bust. They're made to handle alot of pressure.
:lol: VG, thats the most redneck thing I've heard in a long time. Its not the toughness you have to worry about, its the under hood temps. The glass temp (when it stops being brittle and starts being maleable) of PVC is 188* F and I bet that PVC will get that hot easily depending on the spot. Once it hits that point its done, any amount of pressure will cause it to fail if not immediately over time. Just buy some damn steel charge pipes dude, its not like they are expensive.

This reminds me of the time my buddy told me he was going to buy a 14b from a junk yard in town and put it on ONE SIDE of the 350 in his truck. I just laughed and told him to let me know how it goes. :rofl:

This reminds me of the time my buddy told me he was going to buy a 14b from a junk yard in town and put it on ONE SIDE of the 350 in his truck. I just laughed and told him to let me know how it goes. :rofl:

I've seen kits like that for V-style engines that utilize a single turbo running off one side of the engine. But on our old blue 88 Dodge Dakota v6 we are going to remote mount the 14b under the truck after the manifolds collect and Y together.

Tell me that wouldnt be pimpin, turboing our mud truck...It's pimpin allready and semi beastly in the mud.
Sorry for hijacking the thread but I wanna show off the Dodgeskee

http://i12.photobucket.com/albums/a228/nilla_pimp/dodgeski2-1.jpg

http://i12.photobucket.com/albums/a228/nilla_pimp/dodgeski-1.jpg

Okay
So Being a complete cheap ass and redneck. I'm going to try to pull off the $50 Paint job. I will be experiment with Pearl White instead of a Flat Color

$50 paint job? You mean rattle cans? Or roll on boat paint?

$50 paint job? You mean rattle cans? Or roll on boat paint?
Roll on paint
here is my notes so far
Stuff needed to Paint Car

4” The best white rollers
Sand paper
Block Sand Paper
Sealant
Primer
Pearl White paint
%100 Spirit
50/50 Mix
Power washer
BUFFER!

80 Grit
To
100
To
250
To
400
Fix damage and seal dings and dents
Two coats of Primer
Wet Sand 400

Two coats of Pearl White
Wet sand 400
Two coats of Pearl White
Wet sand 800
Check to see the even of the paint

Two coats of Pearl white with Blue Flake
Wet Sand 1200 +
Clear Coat
Turtle Wax Polishing Compund

Is pearl white even available in boat paint?

So if boat paint is self leveling, does that mean it will also work on a vertical surface, (i.e. doors?)

So if boat paint is self leveling, does that mean it will also work on a vertical surface, (i.e. doors?)

You have to turn the up on its side to get it to level out.





JK, yea you can paint on vertical surfaces.

Cool, I need to experiment.....

I think it was nova who painted his car with boat paint. If you do a search, you'll find his thread, it's actually pretty cool.

I'm going to take the expirement to a new level by doing Pearl and Blue Metallic Flake.

boat paint... like haul paint? your brave!!!!

Yeah, it was nova that did that... twice. Check out his progress threads.

First time: http://www.automotiveforums.com/vbulletin/showthread.php?t=593478&highlight=boat+paint

Second time: http://www.automotiveforums.com/vbulletin/showthread.php?t=718961&highlight=boat+paint

Now That the engine part is done. I'm going to into the interior
Front SPeakers are Boston 6.5"
Rear Pioneer Premier 6x9
Amp is Alpine MRP-F450

Update
Engine: Yes the overflow shouldn't be there. Temp until I get my JMfab Catch put in
http://i178.photobucket.com/albums/w275/northendtrooper/0427081449.jpg
Interior:
Have the EVO steering wheel put in and a 4 point harness put in
http://i178.photobucket.com/albums/w275/northendtrooper/0427081450a.jpg

Wow I really like the EVO steering wheel.

What's that white stuff on your radiator hose? Like close to the radiator? Looks like the hose was cut and put back together. Or is it just crap? Just wondering.

Its a piecer Radiator Hose. I'm going to hit up NAPA and redo all of my hoses.

Update
hit 1000 mile mark and I went to swap all the goodies in then I pulle a dumbshit move
http://i178.photobucket.com/albums/w275/northendtrooper/0504081534.jpg
4 days later out of the shop. Shes being cured
http://i178.photobucket.com/albums/w275/northendtrooper/0508081731.jpg

So you never showed me the pics of the helmet...

Welp. Went to tun her two nights ago. This really sucks with my 14b. My motor is so efficient that it is out running the turbo so it won't hold boost. But we were cut short because of my redneck antiques. :crying:
I'll show what the warp elbow looks like.

ON the Way:
2gb sideskirts and Wing
Kenwood XDC X991
My damn 90 degree silicon coupler.

Jeez lol. Kinda dead.
Update
Got all Audio stuff
XDC X991 headunit
Alpine PDX 5
etc
Got sideskirts in and wing is coming soon. Count down until next Sunday where I get to rub her down. w00t w00t!:lol2:

Ok got the Sound System in. LOL I love Ebay
XDC X991 for $300
http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_0973.jpg

PDX-5 5 Channel Alpine Amp. $350
http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_0976.jpg

Goes right underneathe the Passenger Seat. The only thing give it away is the Power Wire in the Engine Bay
http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_0978.jpg

I bet that kenwood head unit sounds amazing by its self. I know mine does, but I have a different model. I too have been thinking about adding an Alpine amp onto my speakers.

Welp. Tomorrow I start the hard stuff. I have a Car Show on the 4th of July weekend. Going to be pulling alot of all nighters i see in the future.

Before and After
http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_1139.jpg

http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_1140.jpg

http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_1142.jpg

http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_1143.jpg

http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_1144.jpg

http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_1147.jpg
Test Fitting the wing. Looks tiny with my big ass.
http://i178.photobucket.com/albums/w275/northendtrooper/Phoenix%20Project/IMG_1153.jpg

I didn't realize the skirts were molded in, that sucks.
Do some more work and post up some pics, I'm interested to see.

Little update and teaser... Oh uh yeah... $50 paint is :bigthumb:
http://i178.photobucket.com/albums/w275/northendtrooper/0626081811a.jpg

Got my Baby up and running. Went around and snap some photos. Need to get a better Camera. Friend will whip up some WAY much better ones. If this doesn't get me Google Famous, I don't what will....On to the good stuff.


Before anybody asks, Yes. I know my Hood is popped, spacers are doing that.

1.
http://i178.photobucket.com/albums/w275/northendtrooper/IMG_1207.jpg
2.
http://i178.photobucket.com/albums/w275/northendtrooper/IMG_1212.jpg
3.
http://i178.photobucket.com/albums/w275/northendtrooper/IMG_1216.jpg
4.
http://i178.photobucket.com/albums/w275/northendtrooper/IMG_1217.jpg
5.
http://i178.photobucket.com/albums/w275/northendtrooper/IMG_1223.jpg
6.
http://i178.photobucket.com/albums/w275/northendtrooper/IMG_1225.jpg
7. Quick shot of the Train Depot. Snagged some Fireworks in it.
http://i178.photobucket.com/albums/w275/northendtrooper/IMG_1226.jpg
8.
http://i178.photobucket.com/albums/w275/northendtrooper/IMG_1227.jpg
9.
http://i178.photobucket.com/albums/w275/northendtrooper/IMG_1230.jpg
10.
http://i178.photobucket.com/albums/w275/northendtrooper/IMG_1235.jpg
11.
http://i178.photobucket.com/albums/w275/northendtrooper/IMG_1237.jpg
12.
http://i178.photobucket.com/albums/w275/northendtrooper/IMG_1255.jpg

The latest pics aren't working... :(

1.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_1207.jpg
2.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_1212.jpg
3.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_1216.jpg
4.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_1217.jpg
5.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_1223.jpg
6.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_1225.jpg
7. Quick shot of the Train Depot. Snagged some Fireworks in it.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_1226.jpg
8.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_1227.jpg
9.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_1230.jpg
10.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_1235.jpg
11.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_1237.jpg
12.
http://i178.photobucket.com/albums/w275/northendtrooper/ARS/IMG_1255.jpg

Blown my 4th turbo...
Now today I finally nutted up and bought a new FP evo 3 16g.

Whew!
I got tired what I though was a bad turbo turns out to be an exhaust leak and boost leak. Go figure :(
So I Nutted up and bought a new FP EVOIII 16g!
Also What made the exhaust leak was a warped manifold. ugh got that fixed along with an EVO 8 gasket

I also got the boost leak fixed. Now I wait until after the Shakatu Matsarui show to have some fun! :runaround:

dude, looks pimp, i like the black lip deal on the front, where u get it from

Home Depot....



































No joke. Door Weather strip for $9 with Double Sided 3m Tape

HAHAHAHHAAH!
I finally figured it out with my damn car, I want to say a BIG thanks to Jake, Paul, Chris and some other guys for helping me out on this.
I did 4/5 passes 1st three were totally utter failure, Boosting to 30psi instantly kinda made me crap my pants a little. On the 4th pass I finally figured out the MBC and had it run on wastegate pressure Time is follow 16.8 at 94mph with a 3.3 60'. I figured I can get a 100mph pass with that. So I turned up the boost a little (still trying to figure it out) and with on 13psi as follow:
R/T...866 Didn't care
60'... 1.909
330... 5.706
1/8... 8.872
MPH... 80
1000... 11.467
1/4... 13.702
MPH... 101.48

Needless to say I'm still giddy as a school girl. Hope to run 23psi next race for 12s!