No spark no start

:banghead: The plenum on our 98 Bonniville series2 went out and it filled the cylinders with antifreeze. We repaired that and drained the cylinders. Now the car will not start it has no spark. We replaced the Crank sensor. Still no spark.we replaced the electric ignition module. Still no spark. Should there be power to one of the wires on the module? Any help or ideas would be greatly appriciated
Thanks in advance
Idagal

The pink (pink/black some years) wire should have 12 volts while the key is on.

ok no spark there now what?

If you don't have 12 volts at the pink wire then check all the fuses on the passenger side.

Edit - #6 under the dash on passenger side.

:grinyes: Was finially able to get back to the problem. The fuse ws the culprit
Thanks so much

Glad you got her going & thanks for letting us know. It's sure nice to hear when a problem gets resolved.