99 Olds cutlass keyless entry help

Hi everyone,is their anyone who can help me i recently bought a keyless remote for my 99 cutlass off of ebay but i cant figure out how to program it,or what the programming connector looks like or where its located at in the trunk.if anybody has any information on how to do this i would be very grateful.
Thanks alot:banghead:

Welcome to AF.

Luckily you can program this year, not certain but I think this link has the programing set up.
Programing remotes 1997 to 2004 models (http://www.automotiveforums.com/vbulletin/showthread.php?t=173306)

Thanks im getting ready to try this out now hopefully this works and i wont have to pay the dealer anything.:biggrin:

I tried this method but it doesnt seem to work for my car,thanks anyway

Hey man I just did this on my 98 olds cutty and the programmer is in the trunk you have to search 4 it, took me 30min and thee phone calls to find mine, so it was located behind the liner on the passenger side behind the rear lights...you have to get at it like you was changing one of the bulbs. Once you pull the liner back, follow the wires mine was taped to them.


Once you fine it have to make a jumper wire with two alligator clips and a wire. Then connect the one end to the programmer and then the other to metal.



Then the car doors should lock and then unlock once or twice. It will do something to let you know its in programming mode. Then hold down the lock and unlock bottoms on the remote (up to 4 remotes can be programmed at this time). The car doors should lock and unlock letting you know that it has been programmed. Then just disconnect the programmer and make sure the remote work as it should.