71 Alfa t33/3 reference needed

Help! I'm working on the Scale Designs kit of the Alfa Tipo 33/3 Targa Florio winner. I need reference photos of the back of the car showing the support braces, taillights, etc. All I've been able to find so far are cars with the smaller rear support which I understand to be incorrect for this car.

Thanks,
Mike

Oh well if something jump out I'm interested too... thanks :)

http://farm3.static.flickr.com/2057/2252631012_1f91a205c7_o.jpg

Dont know if its the right one but here you go

LemansNut,that photo is of the restored cars rear(its wrong).Are you doing the Targa car?You have to line up the photoetch part along the inner rear flaps on the body.The larger photoetch brace part is correct for the Targa cars.The bottom of the V brace connects on top of the gearbox.For the rear lights ,you need to use the round ones.The larger tail light is red and smaller orange.

TT/SD

Thanks all,
I did get a fairly good pic from one of the modelers over at F1M showing the long rear brace. I'll post a pic or two when it's complete.

Mike