Our Community is over 1 Million Strong. Join Us.

Carnivore Diet for Dogs

AIR DRIED BEEF DOG FOOD

96 jimmy


dakkota65
02-05-2008, 06:33 AM
hi new here , having problem with driver,s power seat wont move/ checked fuse . even put used power seat got from friend it worked in his jimmy what can i do thanks

MT-2500
02-05-2008, 10:03 AM
Welcome to AF.
Are you getting power and ground to the seat motor?
MT

dakkota65
02-05-2008, 06:07 PM
hi new here , having problem with driver,s power seat wont move/ checked fuse . even put used power seat got from friend it worked in his jimmy what can i do thanks hi no did not think about that .. what do i need to check?

MT-2500
02-05-2008, 06:21 PM
Check switch for power on orange wire power feed wire from circuit breaker A in IP fuse box to power seat switch.
May have to have key on.
For ground black wire check for good ground wire on rear of right cylinder head.
The front to back motor reverses power and ground on light green and tan wires to move seat backwards or forward.

dakkota65
02-07-2008, 05:14 AM
hi have,nt had a chance to check the seat.. fuel pump went on me ;had to get it towed to the shop . mechanic said pump is new and works got it back homeand let it sit overnight now it,s leaking ...gas guage is not working still what to do.....:banghead: live in nj

MT-2500
02-07-2008, 09:02 AM
If it is leaking gas take it back to the mechanic.
And also ask him to test/check the fuel gauge.

Where is it leaking?

Was the complete fuel pump module replaced?

Was the gas gauge working before the pump quit.?
How much fuel did you add after pump was replaced?
MT

dakkota65
02-07-2008, 05:07 PM
well i took it back and he did not charge me . found out the hose leading from tank cracked,,the gas gauge wiring had rubbed up against the body causing it to short out ..works now perfect thanks for help

MT-2500
02-07-2008, 06:40 PM
You are welcome and thanks for letting us know how it went.
If it is not right always take it back.
And give them a chance to fix it right.
Most good repair places stand behind ther work and want to know if anything is wrong with what they did and will work with you on getting it right.
Sounds like he done on taking care of the problem.
Good luck
MT

Add your comment to this topic!