Where can I get....
Skii
01-31-2008, 05:37 PM
the small circular rivets on 1:20 F1 car monocoques?
Hi chaps, I'm embarking on a Tamiya Mp4/5 build and I've read through Steve nobles fantastic build thread, but i'm a bit lost as to where to find the tiny circular rivets - can anyone recommend a manufacturer or supplier ?
thanks
john
Hi chaps, I'm embarking on a Tamiya Mp4/5 build and I've read through Steve nobles fantastic build thread, but i'm a bit lost as to where to find the tiny circular rivets - can anyone recommend a manufacturer or supplier ?
thanks
john
jaykay640
01-31-2008, 06:07 PM
For "real" turned rivets ( and hex bolts ) go here:
http://www.scalehardware.com/
Many of those he used are "just" photoetched though.
There's a set of these from Scalemotorsport ( can be found at many shops ).
For really small ones search for MCG ( Model Car Garage ). I have their set "MCG-609" and they are the smallest i have ever seen :-)
http://www.scalehardware.com/
Many of those he used are "just" photoetched though.
There's a set of these from Scalemotorsport ( can be found at many shops ).
For really small ones search for MCG ( Model Car Garage ). I have their set "MCG-609" and they are the smallest i have ever seen :-)
Skii
02-01-2008, 02:52 AM
Thanks Jaykay - the photo-etch scale hardware ones look perfect, I'll have a look around for them.
cheers
John
cheers
John
stevenoble
02-01-2008, 12:45 PM
Hey John,
These were the exact ones that I used on the monocoque from Model Car Garage.
http://www.modelcargarage.com/store/pc/viewPrd.asp?idcategory=13&idproduct=47
Hope this helps.If you have any more questions ask away
Best Regards,
Steve
These were the exact ones that I used on the monocoque from Model Car Garage.
http://www.modelcargarage.com/store/pc/viewPrd.asp?idcategory=13&idproduct=47
Hope this helps.If you have any more questions ask away
Best Regards,
Steve
Skii
02-01-2008, 05:16 PM
Brilliant - thanks Steve !
John
John
Automotive Network, Inc., Copyright ©2025