B16a1

what is need for a swap in a b16a1 in my hatchy...can i use my stock axles..?.. can i use my clutch cables..? my gas cables... u tell meeh..will do swap soon...cause i strip my drain plug on my tranny i think i over tighen it so im piss shit dont want to tighen.gonna put JB weild up in that b*tch...so im saving up for a b16a1 swap... need some inputs...

Short answer? You need everything and then some... keep saving :p

ummmmmmm thanks....

Well... it beats saying "use the search function not to menton the stickied links" which have this info in it ;)

no you cannot use your stock axles, you need axles from a 90-93 integra, i was told that the stock clutch and throttle cable from a si will work, but idk for sure. since you wired for the z6, idk how you did it, if your running the si stuff or if you changed the wiring to odb1, idk what youll do for wiring, youll need the motor mounts, shiftlinkage. it will run you about $2500 for all the parts and everything if your doing it yourself, it will run you about $3000 at a shop so you wont need to worry about buying all the parts cause they do everything. idk thats all i can think of

I got a quick question, what model 90-93 Integra ( LS, GS, RS, GS-R ) axels fit a JDM B16a1. My axels are clicking sooooooo bad, and I thought that you could only use B16a1 axles. Let me know ASAP, cuz that clicking noise is... LOL, "driving" me up the wall. Sorry, didnt mean to get off topic. Thanx :)

Integra LS axles

www.hasport.com will tell u the list of things you need.

Check this out for your ECU (http://www.zdyne.com/) i will be doing this when i get the z6

The 90-93 teg axles work...so long as you aren't using the SiR Y1 intermediate shaft (it's longer) like I am.