95 4x4 not working
crashflyer
01-11-2008, 02:34 PM
Hello,
I have a 95 s-10 blazer with the pushbutton 4x4 and after searching I cannot seem to find the same problem I have. The vehicle will go into 4 low but will not go into 4 high. When I push the 4 high button there are no blinking lights or any kind of engagement. But it works fine in 4 low. I replaced the dash switch and that did not help. I have a light in 2 wheel drive and one for 4 low.
Thanks in advance.
update: I diconnected the battery and reconnected it and now the 4hi is working. What would cause that problem and how could it be fixed?
Thanks
I have a 95 s-10 blazer with the pushbutton 4x4 and after searching I cannot seem to find the same problem I have. The vehicle will go into 4 low but will not go into 4 high. When I push the 4 high button there are no blinking lights or any kind of engagement. But it works fine in 4 low. I replaced the dash switch and that did not help. I have a light in 2 wheel drive and one for 4 low.
Thanks in advance.
update: I diconnected the battery and reconnected it and now the 4hi is working. What would cause that problem and how could it be fixed?
Thanks
old_master
01-12-2008, 04:46 PM
Might be a problem with the TCCM, the encoder motor, or electrical between them. Going to be difficult locating the problem if it's working right now.
Automotive Network, Inc., Copyright ©2026