Quick question

Will this fit my 95 blazer? V6 4.3 L engine? Everything measures out right, but it says s10 blazer....

???? :sly:

oops forgot to add the link

http://cgi.ebay.com/ebaymotors/94-95-97-S10-Pick-Up-Blazer-2-2L-Cold-Air-Intake-K-N-F_W0QQcmdZViewItemQQcategoryZ38634QQihZ013QQitemZ2 30210510390QQrdZ1QQsspagenameZWDVW

why not just get a cold air intake for a 4.3 theres lots on ebay

i couldnt find any

i couldnt find any
here is what you need for your 95 4.3:
http://cgi.ebay.com/ebaymotors/92-93-94-95-S-10-S10-BLAZER-JIMMY-CPI-4-3L-Air-Intake-2_W0QQitemZ230210516854QQihZ013QQcategoryZ38634QQs sPageNameZWDVWQQrdZ1QQcmdZViewItem

here is what you need for your 95 4.3:
http://cgi.ebay.com/ebaymotors/92-93-94-95-S-10-S10-BLAZER-JIMMY-CPI-4-3L-Air-Intake-2_W0QQitemZ230210516854QQihZ013QQcategoryZ38634QQs sPageNameZWDVWQQrdZ1QQcmdZViewItem


That is exactly what i got for mine, the only thing u need to do is watch to make sure the altanator dont rub on the tube, and use silicone on the rubber gromets for your sensor and the vacume line in the intake before plugging them in...and let the silicone dry b4 use

good point, idk if that ebay intake for the 95 has a relief in the tube for the alternator pulley. I had an FIPK on my 95 and it did have that relief so it fit fine.

good point, idk if that ebay intake for the 95 has a relief in the tube for the alternator pulley. I had an FIPK on my 95 and it did have that relief so it fit fine.


no it doesnt have any reliefe, if it rubs, u just pull it about an 1/8" to 1/4" forward on the throttle body, it will still have plenty of room to clamp to the tb but will also move the tube enough away from the altanator pulley...also make sure u still have ur fan shroud, or over time the tube will work its way down and get caught in the fan blades...although i didnt experiance this myself, i can clearly see that this could happen