pushrod mix up
nitesnyper
01-03-2008, 12:01 AM
I know the difference from the exhaust and the intake push rods. The thing is now I have Brand new rods and lifters and don't know where the exhaust and intake rods go! Screwed 4Life!
jeffcoslacker
01-03-2008, 01:01 AM
I'm a bit fuzzy...you don't know which rods are which, or which hole is which?
If the confusion is the rods, can you tell by measuring the difference in the old ones?
The exhaust lifters, pushrods and valves are in line with the exhaust ports. Or am I missing the point entirely?
If the confusion is the rods, can you tell by measuring the difference in the old ones?
The exhaust lifters, pushrods and valves are in line with the exhaust ports. Or am I missing the point entirely?
wafrederick
01-06-2008, 04:51 PM
Put them in the right spot or the valves will bend if you dont.
Automotive Network, Inc., Copyright ©2025