Help With Boschmann Speakers

Hi All Got Complete Componet Kit With No Instructions 2 Small Boxes About Size Of Battery With Balanced Cinfiguration Written On Then With Wires For In And Wires For Out Where Do These Connect To Is It 1 Between Rear Speakers And One Betwwen Front ??

Component Speakers usually are a "2-way" design that consists of a "Woofer" and a "Tweeter". The box you are referring to is called a "Crossover", it is designed to "split" the low and high frequencies and route the low frequencies to the Woofer and the high frequencies to the Tweeter.

where do i wire them to is it on for the front and one for the back, or is it one between right front and back one left front and back which wires go to in and which go to out

I would have to see a pic of them, you're descriptions are very confusing. Do you have a model number stamped on it anywhere ?

MB-42XT complete component kit includes two 4" midwoofer two1" tweeter two battery sized boxes written on them balanced cofiguration impedance compenseted crossover network on each of these 2 wires going in and oppisite 2 wires going out

wow, the company website is WORTHLESS. There is no search function and I could not find you model # on their site.

OK, I found a pic on a UK website. It's nothing special, it has a 4" mid, a 1" tweeter and a passive crossover for left and right. To connect it up, the output of you amp for that that side goes into the crossover box whre it's labeled input, then the place labeled woofer is where you connect the wire that goes to the 4" speaker and the place labeled tweeter is where the wire goes that powers the tweeter. Remember you have to do one of these wire ups for BOTH left and right channel.