Indiglow guage & engine light

I'm a newbie to installing my indiglow guages. I installed the guages onto my 2000 Honda Accord just fine but hit a wall because I don't know where to tap the red inverter wire. I really thought I could find the parking light fuse but it's not listed as such on any fuse panel. I pulled out the instrument light fuse and put it back in after I tested the parking lights and they weren't affected. But now, my check engine and SRS light stay on. All I did was pull a fuse out and put it back in. I'm confused. So... what do I do about these lights being on... and where is the parking light fuse (or best source to tap the postive wire of the inverter)?

Any help please..... thanks.

qdpie

I'va actually done this quite some time ago. The tap was not hard to find. Let me go back to my set up and see if I can find it. I know the wires are near the fuse box on the driver's side of the car and you simply need to tap into the corresponding wire there. Gimme some time to look at it.

if you had the ignition turned on and had the gauge cluster out it will set an srs code.

i did exactly that and got no srs coding - beats me.

because you have a 99 thats why. that system doesn't pick up the seatbelt lite on the gauge cluster.