Best Clutch

ok I am new to this site, so I am sure this has been asked many times, but here i go anyhow. My clutch is going pretty bad, so I'm wondering what clutch is the best to go for, performance wise and best-for-the-buck wise. Also, last time the clutch was replaced they had to resurface the flywheel. Would it be good to go ahead and get one of those too? I heard on this site the Type R is a good one, at 12 lbs. is that the best, w/o hurting torque b/c I want to keep those ft/lbs. Also, how hard is it to change out the clutch by yourself? What all would I need?

Well what motor do you have?

d16a1 i believe, its the EX engine, my brother says its the Si one...

i got a center force stage 2 for under 3 bills. i hear the stge 3 is too grabby. as for my stage 2, it isn't too grabby and isn't stiff to push in. i have also heard it's not too good for turbo set ups. so far it's been really good with the y8.....so i'm sure it would do great with an a6

and yes...the ex has the d16a6 :). 4th gen ex & si have same engines

ah, a6.... tho i hhave no idea what all those a's, y's, b's is all about, but atleast i know what I have :) i was wondering what those clutches on eBay would be like, the Exedy ones they have all the time, usually going for like 100 or so. i'm kinda po' right now, so i'm just lookin for something that I can use pretty well right now on a tight budget. also, the flywheel before was resurfaced so do i need a new one now that my clutch is bad again?

lol, i'm a d series kinda girl. so here's a little info for ya.....

88-91 DX d15b2 1.5 sohc no vtec
88-91 Si/EX d16a6 1.6 sohc no vtec
92-95 Si/EX d16z6 1.6 sohc vtec
96-00 EX d16y8 sohc vtec

if you ever want to know the specs of any of those or B series engines....Honda Hybrid has a really good specs page

http://tech.hybridgarage.com/tech/specs.htm

:flash:

and just to add it in since you said it, d16a1 is a 86-89 integra engine.

Originally posted by 88CiViC_DX
and just to add it in since you said it, d16a1 is a 86-89 integra engine.

look up again...lol.

Civic Engine
Civic Engine
Civic Engine
Civic Engine

i see no integra :evillaugh j/k

Originally posted by LadyNRedSi


look up again...lol.

Civic Engine
Civic Engine
Civic Engine
Civic Engine

i see no integra :evillaugh j/k

blah....he thought he had a d16a1 so i thought i would let him know what it was. Even though he has the d16a6 :)

oK so what about that eBay clutch again?? sorry hadda bump this up

jsu remember u get wut u pay for. if u want something that u can use after u get further into mod'n...then get a clutch masters stage 3 or an ACT w/ an Xtreme pressure plate...jus stay away from puck designs, they're a bitch to daily drive w/...no feathering

I'd say get clutch masters depending on what you want to do get a stage that matches 1 for bolt ons 2 for bolt ons/NOS 3 some work/NOS/smallTurbo 4 lots of work/NOS/Big Turbo 5 Insane stuff but i'd stay away from ACT i've seen some problems with them hope that helps.

no problems here or w/ my bro's b16 JRSC hatchback when he had it...so i dunno if u could really say they are unreliable, jus bad luck?