need some info on the 1986 300Z plz

i'm lookin at this 86 300Z to buy as my next car and i need some info on it. first is how much would a new trans cost?(auto or manual) how fast can it go and what's the stats?

thanks!

Is it a tubo or NA?

hello.
i am also thinking to buy a 86 300z turbo auto as my first car. my neighbor best freind want to sell his 300z with 180000 miles to me for real cheap price. i consider myself preety good at maitaining car, i help my dad do tune up (fuel filter, belt , plugs, etc) to his 96 nissan maxima. if i bought the car i will keep it for at least 5-10 years.

my question are what is the spec of 86 300z turbo, is the car easy to maintain, easy on gasoline, etc.
any positive input is appriciated

Thanks in advance,

Ryan.

Some specs

1986 Nissan 300ZX Turbo (auto) 7.4(0-60) 15.7(1/4)
1986 Nissan 300ZX 2+2 8.8(0-60) 16.5(1/4)


Model Year: 1986
Body Style: 2-Door Coupe
Engine: Fuel-injected 3.0 liter (2960 cc) SOHC V-6, normally aspirated
Horsepower at 5200 RPM: 165
Top Speed: 145 MPH
Torque @ 4000 RPM: 173 ft./lbs.
Dashboard: Analog
Gross Vehicle Weight: 3643 pounds
Front/Rear Weight Distribution: 51/49
Wheelbase: 91.3 inches (2+2 is 99.2 inches)
Length: 173.4 inches (2+2 is 181.3 inches)
Width: 67.9 inches
Height: 51.0 inches (2+2 is 51.6 inches)
Ground Clearance: 5.9 inches
Fuel Tank: 19 U.S. gallons (72 liters; 15-7/8 Imperial gallons)

That's all I could find.

Where'd you get that info? Cause it's close, but not quite.

go to www.z31.com

Close enough.:D

Hey Ryan, I would only recommend buying that '86 turbo if it has been rebuilt recently. Otherwise you're looking at a rebuild you must do very SOON. The car is easy to maintain but the lack of space to work around the engine isn't so good. It's about average on gas.

To get a look at upgrades and the gains you will get from them http://z31.com/nfaq/faqview.php?ParentID=7#33

my 86 300zx turbo is running 250 hp @ 5400. and i run 14 flat in the 1/4. not too many mods, just the fipk kit (good for 30 h/p) 240sx intake, 3 in. exhaust, and a msd ignition.