Our Community is over 1 Million Strong. Join Us.

Carnivore Diet for Dogs

AIR DRIED BEEF DOG FOOD

B18a ?


DArkforces9
02-06-2003, 02:11 PM
I cant find this anywere on the web. How much HP does the B18a have?

civicHBsi91
02-06-2003, 02:14 PM
im guessing around the same amount as the b18b :confused:

BLU CIVIC
02-06-2003, 02:16 PM
130hp@6000rpm 121 ft/lbs@5000rpm 9.2:1 c/r

DArkforces9
02-06-2003, 02:16 PM
So it wouldnt be worth it to go with the b18b right.

civicHBsi91
02-06-2003, 02:18 PM
b18b has like 145 hp, you would probably be alittle happier with the b18b

BLU CIVIC
02-06-2003, 02:19 PM
• DOHC 4 Cylinder 16 Valve
• Hydraulic Transmission
• Displacement: 1834cc
• Torque: 127 lb-ft@5200
• Horse Power: 142hp@6300
• Compression Ratio: 9.2:1

DArkforces9
02-06-2003, 02:22 PM
is there enough space left over to put a turbo on? or do you have to move stuff?

BLU CIVIC
02-06-2003, 02:23 PM
ENOUGH SPACE BUT YOU MIGHT WANT TO RELOCATE UR BATTERY TO THE TRUNK....WHAT ARE U TRYING TO DO?

DArkforces9
02-06-2003, 02:26 PM
i was thinking of getting a b18b and putting a turbo on it. I dont want to run like 12lbs boost only like 6-8lbs.

BLU CIVIC
02-06-2003, 02:27 PM
WHAT ARE YOU TRYING TO GOAL ACHIEVE OR ARE YOU WANTING TO SPRUCE UP YOUR STD??

DArkforces9
02-06-2003, 02:29 PM
that was the idea. should i just dump th std and get an si?

Jmunk
02-06-2003, 02:31 PM
I would get an Si and go from there.

BLU CIVIC
02-06-2003, 02:34 PM
YOU CAN DUMP YOUR STD AND GET AN SI OR JUST CONVERT IT TO AN SI.....ME PERSONALLY I'M SWAPPING MY STD FOR A DOHC ZC AND ADDING A TURBO....


http://www.automotiveforums.com/vbulletin/showthread.php?s=&threadid=85429

DArkforces9
02-06-2003, 02:38 PM
Thanks for the help

BLU CIVIC
02-06-2003, 02:40 PM
NO PROB

jam4484
02-06-2003, 02:43 PM
90-91 b18a 130 hp 121ft-lb 92-93 b18a 140 hp 121 ft lb

H4Bangin
02-06-2003, 03:02 PM
http://www.geocities.com/motorcity/speedway/1115/enginespecs2.html

Tony
02-07-2003, 12:57 AM
Check out my honda enthusiasts page, I got a bunch of engine specs on there, still missing quite a bite.

mellowboy
02-07-2003, 11:35 AM
Originally posted by DArkforces9
i was thinking of getting a b18b and putting a turbo on it. I dont want to run like 12lbs boost only like 6-8lbs.


Thats good actually. You can run 12 psi on stock internals. YOu have to upgrade your fuel though and ignition. And rite away take it to get it tuned nicely. From what i've been told that ls motors can handle 12 psi on stock internals. My friend is gonna do that set up. B18a is a good choice also.

mellowboy
02-07-2003, 11:37 AM
Originally posted by DArkforces9
is there enough space left over to put a turbo on? or do you have to move stuff?


get mounts from www.hcpengineering.com

I got 4 mounts with mine and it creates more room for turbo even though i'm not goin on that route.

Add your comment to this topic!