Small Flaws

I was compounding my models, and i saw some small flaws in the paint. also, while compounding, for the first time, i did it to hard, and made a little spot go almost down to the primer!!!! so my question is, In you're models, how many flaws do u find yourself, cuase some pictures just don't justify each model.... I know if i take pictures, you couldn't tell if it was good, or bad, or perfect......
I can't spot any flaws in pmans...

I think its very hard to get the 100% perfect model.
Most of mine i can see flaws in that im not happy about, but i think the more you build, the better you want to get. At times and you can just get to fussy.
As long as you dont make the same mistake and learn from it...you can only get better with time

think of it this way...
when you build it, you will know where most of the imperfections are, no matter how insignificant they are.

getting it 100% perfect is going to be impossible. if it is something small, i usually get iritated by it until i start the next kit... if it is something big, i usually notice it, and fix it before i move on.

except for the wing tips that i put on 2 different ways on the integra wing that i scratch built... didnt notice that one until 2 months after i was done!!!

~Mike