Front End Conversion

I have a 96 integra. I was wondering if anyone knows if i could make a front end conversion to an RSX front. I was looking at some dimensions for both cars, and they have the same width, length, clearance and such. I don't know if the radiator is the same, or the harness for the radiator is the same. Does anyone know if it could be done?

Thanx

Originally posted by sychox
I don't know if the radiator is the same, or the harness for the radiator is the same. You would have to cut off the radiator support
http://www.imagestation.com/picture/sraid40/paae0d58fb536087417e76b47d5c78cc2/fcfcb1da.jpg
which is that black front piece that wraps around the front.
And then weld on the one from the RSX, and I dunno about the harness.

I know that the upr and lwr radiator hose is on the left for an integra. i don't know what is for the RSX, which could cause a problem if you know what i mean.

do a jdm conversion on ur teggy, it looks much nicer

still very expensive thought