got FIAMMs installed

not a real big deal, but always liked the italian horn tone. :p

the chirp for arming the alarm dont work any more. the chirp is too short that the compressor runs only a split second..a split second too short to run enough air into the horns. so, i disabled the chirp. stock horns are still on the car, so if the horns go bad, I have back up. :D

took me a good 2 hours to do, taking my time.

any pics of where you mounted it?
i think i hear you honkin already
casual

let me see if I can get some decent picts this weekend. Im planning a photo shoot out on my lude and g20 for my buddy's site. :D

basically, the compressor is mounted on a home made T braket off where the stock bracket comes out on the front horn. the stock braket was extended off this T bracket. the relay is on the hole right above it on the otherside of where the hood release latch is hinged. the horns are mounted on a straight metal braket that was mounted on the right hand lower hole under the hood release. horns are perfectly prependicular to the ground and not showing from the lower vents.

i can wire it back to stock within 15sec if the compressor goes bad in the cold. :p I could've easily put a dpst switch, but was too lazy to wire it.

here are some picts of the install
http://members.tripod.co.jp/ubaban/fiammfront
http://members.tripod.co.jp/ubaban/fiammcompressor
http://members.tripod.co.jp/ubaban/fiammhorn

cool it fits perfect in that spot umm so its wired to your horn off of steering wheel or is it wired to its own switch the horn opff the switch is a killer cuz like someone is passing by you or vice versa and you want to just tap and say hi lol yeah right not with this steering wheel you gotta practically punch at different angles lol anyway it looks good man

now in days all people seem to do is turn on their alarm chirps to say hi to people how they do that i couldnt tell you plus its not like anyone here on forum can even tell me where the alarm box is on the car and its not in the book for the car anyway i need to stop whining looks god and i bet it sounds great
casual

cas8- its hooked up to the stock horn switch. if you look at the compressor side picture, you'll noticed that I tapped into the stock horn wiring. :p works good. i did de-activate the chirp for arming the alarm though...not enough air to the horns (too short a chirp) :D

Here's a pic of my horn location...

Aw carp I guess a pic would help. :)

good work. come to think of it, that horizontal mounting is how i have it in my lude. :p hey, check out them TEIN's!. hehehe. :D man, that towerbar's lookin nice too. and check out the blue head.