Stock springs

Hey i know i'm really needy but i need a set of stock Civic/CRX springs any model will do i just need a set that is not saggy for my 91 hatch the guy i got it from CUT them and i need to raise my car up and i dont have the money for a good set i will be happy 2 pay for shipping or i could pick them up if u live in the sacramento, CA area!!!

I can get you a set. But they will need to be pulled from a junked car. If you are interested, let me know.

yes that would be very nice of you let me know how much i need a set this week for sure i was told by the resident CHP to raise my car he was not in the mood 2 give me a fix it ticket considering he was in MY driveway but he did mention it so i'm gunna comply since my car is TOO low to go in my drive way with out going un usually slow so i need a set BAD

if i were you i would measure the distance between your headlights to the ground,,i heard the legal limit in cali was 22 inches

hey man, if you live in sacramento, just crusie over to Honda-Acura parts in Rancho Cordova, I am sure they will have some stock springs for you.

www.haprecycling.com

why not go to a u pull kind of junkyard? they are generally cheap. you're lucky to have those kinds in sac town where you can find honda parts to pull.

i thought i saw melt say there were some 4th gens at the junkyard by him. melt posts so much...i can't remember where i saw it ;) (just playin' with ya....don't get :mad: )

Yeah, there was like 2 sedans, 2 hatches, and a crx, but most of em had the suspension / brakes already taken off em.

I was very suprised to see 4th gens there though, cause last time I went to pick and pull, all they had were 3rd gens, and like the newest car in the whole place was like a 95 geo.

Originally posted by ev0lution7
i was told by the resident CHP to raise my car he was not in the mood 2 give me a fix it ticket

you guys have a hight requirement, here it is you can not have any body part below the bottom edge of you rims. Thats crazy man.

Originally posted by Civic Rush


you guys have a hight requirement, here it is you can not have any body part below the bottom edge of you rims. Thats crazy man.

us too in cali cant be below the bottom of the rim line (lol 35 series tires)
and no lower that 22 inches from the ground and no higher than i think 72 inches off the ground

it has to fall within those guide lines

I have a set of 1990 Civic Si HB OEM springs..
I'll sell them for CHEAP
email me [email protected]

Hi guys, i need 2 know talking about suspensions if i can change my stock lower posterior arms with integra's ones.

Can i? is it possible to do, like, the chassis is the same?

YES u can change over to the integra ones but u have to get BRAKES the knuckle and a ball joint seperator and some cotter pins OH and u might want to get some new brake lines when i did my swap it was a TITE fit call H.A.P they have it for $150 (pass and driver set)

BRAKES the knuckle and a ball joint seperator and some cotter pins OH

sorry, i don't get what you are saying:(