b16a mod list some help?

Im dropping a b16a sir1 into my 88 rex im getting the motor and not installing it for like 2 months what kind of bolt on mods and complete service should i do to the engine? thanks you

how much you wanna spend, if its only bolt ons just get a Intake, header, exhaust, but you may as well change the cam belt and give a good once over before you wack it in

It depends what u want to do? Go all motor or turbo? If you want basic bolt ons and later u want to go turbo. Just save up and go turbo. IF not then i would get this...dc sports jdm header with dc or thermal cat back. Intake i would get aem i guess? Get an ITR throttle body and skunk2 manifold. Your car will be decent with that set up.:)

With that setup how much horse would i be pushing

Originally posted by Crxce
With that setup how much horse would i be pushing

It really depends on tuning man. Its really hard to say. Get a v-tec controller along with it. I bet you'll hit low 14's with that set up.

he should hit low 14's with just the engine alone in the crx, if anything he should hit 13.9-14.1 range.

but im doing the same thing as you, i got the motor and now im building it up.

ive got DC Headers 4-2-1, Apex Exhuast, Catco High Flow Cat, CTR Cams, Titanium retainers, Dual Valve Springs, Stainless Steel Valves, CTR pistons, and eagle rods.

Originally posted by crxlvr
he should hit low 14's with just the engine alone in the crx, if anything he should hit 13.9-14.1 range.



Nope. High 14s bone stock b16. With i/h/e should hit mid 14's.