Project Diamond Dust
小白 Gen3_rAcR
01-16-2003, 02:47 AM
hey, I'm using my old gen 3 for a project car... our team, Diamond Dust, is still wet behind the ears, and so we wanted to have something to get us recognized... and I'm looking for some help.. tips, ideas, feedback... anything
One possible look...
http://www.geocities.com/elfinchylde/accord_angle.jpg
The car is a 1986 Honda Accord LX (*sighs* not LX-i, sadly) and currently is in a state of engine rebuild.. since I have everything apart, I was thinking, either I should do an engine swap B20A, which would be the best choice, but would tear a huge freaking hole in my budget, or I could just do as originally planned, bore out the engine, replace the pistons, and do the other usuals.. camshafts, flywheel, crank, etc.. my budget is about 500 for engine money, then anything else is extra.... I would be doing all of the work by myself, and therefore, would make it a LOT cheaper...
Other issues are the headlights... in teh picture below, the accord has new gen prelude headlights.. http://www.geocities.com/elfinchylde/accordpic1.jpg
does anybody know of a kit, or how this was done.. I'm going to email Tantrum racing to see if they can tell me how they did this...
any tips would be appreciated ^_^
One possible look...
http://www.geocities.com/elfinchylde/accord_angle.jpg
The car is a 1986 Honda Accord LX (*sighs* not LX-i, sadly) and currently is in a state of engine rebuild.. since I have everything apart, I was thinking, either I should do an engine swap B20A, which would be the best choice, but would tear a huge freaking hole in my budget, or I could just do as originally planned, bore out the engine, replace the pistons, and do the other usuals.. camshafts, flywheel, crank, etc.. my budget is about 500 for engine money, then anything else is extra.... I would be doing all of the work by myself, and therefore, would make it a LOT cheaper...
Other issues are the headlights... in teh picture below, the accord has new gen prelude headlights.. http://www.geocities.com/elfinchylde/accordpic1.jpg
does anybody know of a kit, or how this was done.. I'm going to email Tantrum racing to see if they can tell me how they did this...
any tips would be appreciated ^_^
DemonicAccord
01-17-2003, 10:34 AM
:bloated: red x
小白 Gen3_rAcR
01-20-2003, 11:40 PM
sory, the pictures did not show.. so I am reposting them... Here's the project accord:silly2:
小白 Gen3_rAcR
01-20-2003, 11:43 PM
and here's the accord with prelude lights:bloated:
Automotive Network, Inc., Copyright ©2026