hotshot header

I've been thinking about getting a Hotshot header for my G20 but i've heard that it doesnt have holes for the 0xygen sensors, what does everyone do about those. Also is it difficult to install. I might just get it professionally installed. How much do you guys think it would cost if I went to a shop to get it installed?

Originally posted by 2001G20
I've been thinking about getting a Hotshot header for my G20 but i've heard that it doesnt have holes for the 0xygen sensors, what does everyone do about those.

Tell whoever told you that to take their head out of their butt.

Of course it comes with the O2 sensor bung. It also comes with the AIV and EGR bungs (threaded fittings). It also comes with a allen screw to plug the AIV if your car does not have the AIV valve.

The Hotshot header is the best one available for the SR20.

Does anyone know where to buy the Hotshot headers in New Zealand???

i got mine just fitted saturday and its really good. try www.motivational.net ask for mike cos he sorted me out, tell him Kevin from England UK sent you. He should be able to ship to NZ if he can ship to the UK.
And it does have the sensor hole, three of them infact, i had to plug up two of em, but the kit only had one blank, but luckily, i had some spare part lying around and got something that fitted nicely.

I want a HS header too! :D Anyone know of any group buys?

Originally posted by P11GT
i got mine just fitted saturday and its really good. try www.motivational.net ask for mike cos he sorted me out, tell him Kevin from England UK sent you. He should be able to ship to NZ if he can ship to the UK.
And it does have the sensor hole, three of them infact, i had to plug up two of em, but the kit only had one blank, but luckily, i had some spare part lying around and got something that fitted nicely.

If you order from Mike at Motivational, be sure to tell him your car does not have EGR so you need two plugs. Mike should be able to accomodate you. If he doesn't, let me know and I'll make sure you are taken care of by someone.

You may also check with Glen "Lumpy" Campbell in OZ. I posted his e-mail address and his web site in another thread. I know he's a JWT dealer so he can get the Hotshot header (JWT sells Hotshot) and he may even deal direct with Hotshot. Lumpy is a good bloke and I know he can take care of you. If you contact him, tell him I sent you.

or you can get the headers from me!!! it's not on my web site...but i can still get it.
email me. thanks! I can also ship to NZ.

sorry Luke, didnt mean to steal ya thunder, like you say, its not on the site so i found this guy on Hotshot's site.

Hey!!! get it from Luke, he'll sort you out, tell em Kevin in the UK sent you!!!

better???:D

how much for a header for a 2000 model?

Oh and on another subject, how much for a 3" AEM bypass valve??

Obviously i'm looking for a good deal, i'm nothing but a poor stuggling college student with an unhealthy desire to fix up my car :D

hey fellows from NZ
i think we should do a group buy from prestige automotive......
their headers are polly the same as the hotshot one....
he said about 10% increase on a primmy which sounded about right....

check it out...
www.prestigeautomotive.co.nz

peter is the guy who races the NZ Primera touring car...he knows his shit

anyway..tell me what ya think....


:p :p :p

Originally posted by 2001G20
I've been thinking about getting a Hotshot header for my G20 but i've heard that it doesnt have holes for the 0xygen sensors, what does everyone do about those. Also is it difficult to install. I might just get it professionally installed. How much do you guys think it would cost if I went to a shop to get it installed?


probably around 100$ to install. give or take 50$..but if you want it done right its not that bad of a price.

Originally posted by Mrcoilover
probably around 100$ to install. give or take 50$..but if you want it done right its not that bad of a price.
Heh! If you want it done right do it yourself. :p:p

oh contrair mofrair my friend. That only works when you know what you doing? Am I right. I personally wouldn't know what tha h*ll to do. I
know a little about nothing basically. I could stall a pop'charger and that's bout it. "I am not on your level wiseth one, I am not-eth worthy."
I wish I knew how to do my own sh*t. You sound like you do all yo sh*t yourself. How'd you learn how to "be your own auto tech".
:bandit:

Well the first thing you need is a FSM (Factory Service Manual). Then you need tools. For the first little bit you'll spend as much on tools as you will on having your parts installed.

Anyway I just started with the easy stuff, POP Charger, changing oil, short shifters, dash kits. Then you move up to the harder stuff like suspensions, headers, cams, etc. You'd be surprised how easy it is. I think the biggest hurdle to get over is the fear of f'in up. Also having the proper tools and someone with mechanic experience helps too. Researching the install instructions and looking on se-r.net mailing archives for what others have said about whatever installation you're attempting is always a good idea.

cool. preciate tha info. I think I'ma get one of dem manuals and start
readin up. Maybe some day I will be able to do engine work. I can do minor things.(swapping taillights,bulbs,rims,filter,) holla.:huh: :bloated: :silly:

Originally posted by G-Forces
You'd be surprised how easy it is. I think the biggest hurdle to get over is the fear of f'in up.

Exactly right oh Great and Noble Moderator. :D

I guess I will grab a couple of wrenches and go by some headers tonight and get it done. he he

Originally posted by P10DET


Tell whoever told you that to take their head out of their butt.

The Hotshot header is the best one available for the SR20.


hi hi I have to agree!! :)

I have just ordered a HS header only with the O2 sensor!

I have heard from several people that HS rocks, so I don't think you will be disappointed!

can headers from Sentra/200SX 2.0 SE-R 95-99
work on my 94'G20t?

Originally posted by GtRider
can headers from Sentra/200SX 2.0 SE-R 95-99
work on my 94'G20t?

Yes.

The header is the same for the B13/B14/P10/P11. I've seen this header bolted to a B15, but I understand they actually make a different one for the B15. I don't have first hand knowledge of this however.

I was also thinking of getting HS headers, but do I need the AIV and EGR holes? Obviously I would need the 02 sensor.

hey thankz for the info p10det!
so you think 190.00 is alot for headers?
check dis website out
http://www.creverything.com/cr-obxheader.html

Originally posted by GtRider
so you think 190.00 is alot for headers?


a lot is 2 words not one, just to let you know.
as for the header 190 is very cheap. the hotshot is 475 and jwt is 450. i think jwt sells the hotshot header, but regardless 190 is very cheap. i don't know about the quality of their products b/c of the cheap price(cheap-no good, good-no cheap). if you do get them and they turn out to be good, i would definitly buy them also.

Originally posted by GtRider
hey thankz for the info p10det!
so you think 190.00 is alot for headers?
check dis website out
http://www.creverything.com/cr-obxheader.html


Well, $190 is certainly cheap. I know nothing about the OBX header. A lot of people have talked about it, but I know of no one who actually has one. I personally don't see how they could even offer it for that given the cost of the components alone.

So, if they are OK, you saved a bundle. If they are a POS, you flushed your cash down the toilet.

would the obx fit a 2000 G20?

Originally posted by P10DET
So, if they are OK, you saved a bundle. If they are a POS, you flushed your cash down the toilet.
Hehe, I like that. :hehehe:

I'd wager that the silver coating is just silver paint. It'll probably burn off in the first 5 minutes. But Someone's bound to know.

i hope you guys would trust me on this one and DONT put stuff like obx or tenzo R stuff on your cars...at least not on the G20s, it's all designed for cheap Honduhs...anyway, i can get you a HS header for $425. i can get you an obx for 175..but why???? the paint is gonna come off and it's gonna crack...

MR COILOVER say's "Buy it from Luke"!

Originally posted by G22DET
i can get you an obx for 175..but why???? the paint is gonna come off and it's gonna crack...

Luke, have you ever seen anyone actually install an OBX header and use it for an extensive period of time on an SR20DE? How about dyno runs? If the OBX actually proves to improve HP and torque, aren't you prejudging the product. Then again it probably is a POS! But I would like to see some tests that prove it actually is a POS.

Unfortunately, I don't currently have the funds to do such a test.

I know there are individuals out there that might not be able to fork over $425-500 for the best, but can fork over $175-190 for mediocre.

Just wonderin' if anyone has bought the OBX headers for the SR20DE and can actually give first hand testimonials that they suck, the paint chips off and that they crack.

Originally posted by Mrcoilover
MR COILOVER say's "Buy it from Luke"!


AznVirus say's "Yes, buy it from Luke!"

Originally posted by AznVirus


AznVirus say's "Yes, buy it from Luke!"

he he he .:bandit:

Originally posted by NismoPC
Luke, have you ever seen anyone actually install an OBX header and use it for an extensive period of time on an SR20DE? How about dyno runs? If the OBX actually proves to improve HP and torque, aren't you prejudging the product. Then again it probably is a POS! But I would like to see some tests that prove it actually is a POS.

Unfortunately, I don't currently have the funds to do such a test.

And there you have it. Basically, everyone I know of has elected to buy a known product, i.e. Hotshot, Stealin, AEBS, or even Pacesetter.

The Pacesetter is an OK cheapie. It's a total ripoff of the first gen Hotshot, except it uses thinner tubing (which causes cracking and reduces efficiency) and is painted instead of ceramic coated. I think it also does not use a flex pipe, but rather a cheapo ball and socket device.

I'm with Luke. Don't waste your money. You'd be far better off buying an older used Hotshot, Stealin, or AEBS header.

Originally posted by P10DET
Basically, everyone I know of has elected to buy a known product, i.e. Hotshot, Stealin, AEBS, or even Pacesetter.

You make a good point there.

Here is a thought. What if the OBX is also a cheap copy of an earlier generation HS and the ceramic coating actually increases its longevity? Then it might be in the same class as the Pacesetter or could possibly even be better.

Again, very optimistic and not even SCC has included OBX headers in testing during their header shootouts even for Hondas and that just reiterates the fact that just from reading what I just wrote, the OBX headers are a POS!

Thanks for helping me see clearly George! Hehehe! :sun:

Go with an HS!!!! "Buy it from Luke" Hell I might even buy something from him now.

absolutly, do not buy the pacesetter header,,i had 2 , that's right 2 on my ga16de and they corroded and cracked and yep no frex pipe and a paper gasket.....total waste of money

my cars in getting dyno'd, i'll post up the results later showing what power gain the HS Header has given.

dyno results...........
http://www.automotiveforums.com/vbulletin/showthread.php?s=&postid=76045#post76045

G22DET says.."Buy it from Luke!!!"...oh wait...

Originally posted by G22DET
G22DET says.."Buy it from Luke!!!"...oh wait...

Good one. he he