Updated pics...

http://www.imagestation.com/picture/sraid45/p2ba54bef4ae172230bf6a29169cc0218/fcd479c3.jpg
http://www.imagestation.com/picture/sraid45/p22cc5388eefa895bc4c31eca0fb00545/fcd479c2.jpg
http://www.imagestation.com/picture/sraid45/p672b4dbf04d9ff4777ce987d89df06d0/fcd479ba.jpg
Place Racing Crossmember
http://www.imagestation.com/picture/sraid45/pad976082470d19f70c21eb25a291d18e/fcd479b5.jpg
http://www.imagestation.com/picture/sraid45/pf0a6ae98dafd19384dbcb88a19dcb6b1/fcd479b1.jpg
http://www.imagestation.com/picture/sraid45/p4e0045807a2e533ebc5bbe53f61ab877/fcd479be.jpg

HOLY SHIT!!!!! Nuff said........ WOW man, that is so fukin sweet, i like the YS1 tranny man, LSD bro!!!!! yo, you gotta get that baby dyno'd man, i have to see what its putting out!!! and also, if u can, can u list all the parts and stuff you have on this new engine, like what pistons, and what rods, and valves and stuff like that, i just wanna know the details ;) thanks!

Here it is...

94 GSR head
CTR cams
Skunk2 cam gears
itr valvesprings
itr retainers
itr valve guides
itr motion assembly
5 angle valve job (stock valves)
port & polished
Skunk2 intake manifold
BBK 70mm TB (match ported)

B18A block
US itr pistons (.25 over)
shotpeened rods
balanced crank
Spoon oil pan
Clutchmasters lightened flywheel
ACT clutch

YS1 LSD tranny
Chipped PR3 (5500 Vtec, 9500 rev limit)

BTW, I registered this car for the Jan. 18th Import Motion carshow in San Mateo...

5 angle valve job, i am guessing thats a lot, cause most i've seen is 4 angle, i have no clue what a valve job is anyways, care to enlighten me? :D

I wish I can, haha...my mechanic took it to be machined and those are the specs he gave me...I would assume its similar to a 4 angle job...I just bought an itr valve cover with a matching CF wire cover earlier to prep it up a bit for the show...I'm still waiting for a few little items to be installed... new itr throttle cable and throttle cable brackets, new bottom timing belt plastic cover, new oem battery ties, pair of fender liners...and hopefully get this baby to roll out of the shop by Tuesday...

So, umm.... whats a 4 angle valve job? oh and the ITR valve cover would look hott cause its red, and the CF wire cover, WOW, it matches ur hood ;) thats so cool man, i wish i had the fundage u have!

Dude, your car is the shit..
I'm not ever really feelin' SiR front ends, but JDM tails, SiR rear seats, SiR back bumper, the RNRs...

Love it.

I just charge it and worry about it later, haha...just kidding...I know all this is not cheap, but I had a head start and saved up for it a year ago. I put some money aside when I sold my condo but believe me, its going fast... I still have a few things I want to replace like better suspension, maybe Koni adjustable shocks and good coilovers, replace all under chassis bushings, install rear sways, then maybe a better paint job and hopefully thats it...

a 3,4, or 5 angle valve job is referred to the smoothing out of the edges around the valves. lets assume the angle around the valves is exactly 90° where the valve enters the combustion chamber.

a 3 angle job would cut 3 smooth angles into that 90° at 15°,30°,and 45°: thus making the flow of air and fuel much smoother leading to more horsepower and smoother throttle response.

the more cuts you make into the block the rounder the corner would be leading to higher HP and flow.

Originally posted by crxlvr
a 3,4, or 5 angle valve job is referred to the smoothing out of the edges around the valves. lets assume the angle around the valves is exactly 90° where the valve enters the combustion chamber.

a 3 angle job would cut 3 smooth angles into that 90° at 15°,30°,and 45°: thus making the flow of air and fuel much smoother leading to more horsepower and smoother throttle response.

the more cuts you make into the block the rounder the corner would be leading to higher HP and flow.

ooooohhhhhhhhh................. now i get it.............

looking good :D got any info on the car show?

I so need one of those

nice B18, nice work with the motor as well. I'm impressed, your mech. did a very nice job on the swap. Beautiful motor!

Originally posted by 88CiViC_DX
looking good :D got any info on the car show?

www.importmotion.com

:eek2: thats all i gotta say! congrats dude!

send me the pics and i'll add them to your spot in the featured archive and update your mods list.

someone just sent me that link this morning asking if i was going to the one on feb 8th in sac town :D i might just have to check it out if i'm not snowed in ;)

ps....as always, looking kick ass! you car is tite :flash:

where the rad dude?? or am i just seeing things?

Originally posted by fiercecivic
where the rad dude?? or am i just seeing things?

Haha, you're not just seeing things, I simply moved it to the trunk. Just kidding...Car's not quite done yet. Still need to ground the knock sensor, replace throttle cable and bracket, replace fuel pump and regulator, then that should be it. I'll take a few more pics once it's done...

Thanks Ami, I'll take a few more tomorrow (Monday) since most of the work should be done then send em to you.

Sweet! :) It looks fast man.

BTW, that yellow ae in one of the pics was in Super Street a couple months ago. Nice.

Thats a yellow Toyota Starlet with a 4AGE motor...he needed some help in getting it to pass smog. It used to have a supercharger too...its slow though...

Dude, your paint job is sweet dont even worry about it.

I will be going to the San Mateo show for sure, as well as the Feb 8th sac one, but I need more info on the sac one.