Just got a pony

Well,

It has no motor at the moment but that's only for a few days till I get the 302 from my friend. It use to have a 351 windsor in it but he took it out and put it in his bronco. So the car was pretty much no use after that. But heres what I got, 2 trannies one A0D.and a C4. Along with a rolling chassie with all the interior exceot the shifter . but there's no rust and one minor dent on the passenger side door. The best thing about it though it was free. It did have a B&M shift in it along with a 6inch cowl on the hood. But my friend chris who wont be driving his bird anytime sooner bought the car before I could get the money . He took the shifter and cowl for his firebird,why I don't know he's an idiot. So after that he was like well you can have the car cause I don't need it. But it's all gravy it has a clean title and everything hopefully someone on these forums has a B&M shift laying around there garage or is wiling to trade for a tranney maybe ? Well anyway I wanted to to get some advice as to what carborater should go onto the 302. It's in running condition and runs just needs a carborater. Any suggestions ?
~blackbob~

Damn, I wish someone gave me a free car. Even if it is just a rolling shell. I got a stock AOD shifter, doubt you'd want that though.

Nice choice in cars:D I would recomend the edlebrock performer series, in the 500cfm size. Personly I would stay away from the holleys, they tend to run richer then norm even with tuning. You can pick it up new Edelbrock performer for around $200. Unless you have a heavily modded 302, then anything bigger then a 500cfm will hurt performance. I used the same carb on my 65 mustang with the 289, and it worked great. Only issue is if the intake manifold on your car is set up for a 2barrel carb, if so you would have to swap out the intake manifold. This would be the time to throw on a Edelbrock performer rpm manifold that would match up with the carb and is designed to work well with it. Good luck

Originally posted by HiFlow5 0
Damn, I wish someone gave me a free car. Even if it is just a rolling shell. I got a stock AOD shifter, doubt you'd want that though.
right now I will take anything I can get my hands on. So if you think you can let it go for me that would be great. You can e-mail me at [email protected] or simply mail it to me

Cardae Blue
8819 Bexhill blv.
Orlando,FL
32817

The intake manifold on teh motor now is indeed a 4-barrel. Infact it's a brand new elderborck !

Your well on your way then. What carb do you have on there now?

Well looks like I want be finishing that project of mine. Due to money and other various problems. That and the fact that my mom doesnt think I can finantially handle at the moment I half to get rid of it. So if any of you guys are interested in picking it up and buildin a drag poney your welcome I got plenty and I mean PLENTY ! of pics !

Phone: 407-213-1927 (my beeper with voice mail)
or e-mail me : [email protected]

~Blackbob~

Here they are !

inside

rear end

D-side door the other sidei s just as good

Everyones favorite,the back seat

Damn if you lived closer I would be all over that car! You wouldn't happen to be able to deliever would ya?

My moms letting me go back for round to wth it to see what I can do with it.

hey man i just read your post on stangnet lol ;) :bloated:

Small world !