rusted parts
rdorris84
12-16-2007, 01:27 AM
im trying to replace the sway bar kit (stabilizer bar link) but it rusted , so how can i get them off
CD Smalley
12-16-2007, 05:02 PM
Break them. Cut them in half. They will in all likely hood break when you try to get them off anyway.
rdorris84
12-16-2007, 09:52 PM
what tool can i use too cut them off
silicon212
12-16-2007, 11:12 PM
what tool can i use too cut them off
Whatever floats your boat - a nut splitter, a Dremel with a cutoff wheel, a grinding wheel, a torch, a hacksaw, whatever. Just be careful not to damage anything else.
Whatever floats your boat - a nut splitter, a Dremel with a cutoff wheel, a grinding wheel, a torch, a hacksaw, whatever. Just be careful not to damage anything else.
bobss396
12-17-2007, 10:41 AM
I usually lock a pair of vise grip pliers to the nut, wedge the pliers against something convenient and use a long 1/2" drive ratchet to spin the bolt. Most of the time they just break off. I've also used an air grinder with abrasive wheel to cut the nut off.
Bob
Bob
Automotive Network, Inc., Copyright ©2025