Pulling out a dent(please help)

:banghead:
Ok, long story but I have a dent in the passenger side fender of my 99 Ram. It's about 6 inches by 3 inches. I have decided to try to pull the dent out myself, and would appreciate any recomendations on tools or tips on doing this. I know there are many methods out there but I also know you all would have Ram specific instructions so any help would be appreciated. Thanks!!!

Leo
99 Ram 1500

if you can get behind it a rubber mallet works fine

It's right on the upper fender behind the tail lights, so it looks like i will need to remove the fender, do you know if this is an easy process or if there is a better way? Thanks for the response!

Leo

It's right on the upper fender behind the headlights, so it looks like i will need to remove the fender, do you know if this is an easy process or if there is a better way? Thanks for the response!

Leo

Not sure, if this helps. I never have a dent to fix myself yet but I've watched in youtube where folks used compressed air. The one used for cleaning electrical/electronics stuff. Spray the dent area completely and let it sit for a while and then use a hair dryer.