transmission Question
sdale11
11-27-2007, 07:46 PM
I have a 2004 ford taurus 24 valve 3.0l
ok were would the trans.. pump be at I think this is what's wrong with my car
it will not go into gear it worked fine then just out of nowhere it quit, it will not go into (R) or (D) I just don't know but some friends said it was the pump plezzz help thanks
ok were would the trans.. pump be at I think this is what's wrong with my car
it will not go into gear it worked fine then just out of nowhere it quit, it will not go into (R) or (D) I just don't know but some friends said it was the pump plezzz help thanks
tripletdaddy
11-28-2007, 01:56 AM
I'd investigate whether your shifter is even shifting the transmission into the gears, has it come loose or something hoping it's that and not worse. Does it shift differently. Someone else would have to describe on that vehicle where and what the shifter attaches to at the trans. What I am familiar with is a cable that goes to the top of the trans to a lever. Good luck
mwt47
12-01-2007, 03:22 AM
I would take it to a transmission shop and have the codes read on a correct reader.
The standard OBDII reader will not cover all codes.
The pump is inside the tranny and the transmission has to come out for any inspection/work to be done on it.
Mike
:smokin:
The standard OBDII reader will not cover all codes.
The pump is inside the tranny and the transmission has to come out for any inspection/work to be done on it.
Mike
:smokin:
Automotive Network, Inc., Copyright ©2026
