94 TC Heater Core
goad
11-26-2007, 09:16 PM
Where can I find a diagram that will guide me to removing and replacing the heater core for a 94 Town & Country?
I am getting cold air out only when the temp gage and the coolant levels are normal.
I am assumong that the core is blocked....
Can anyone help?
Thanks
Ken
I am getting cold air out only when the temp gage and the coolant levels are normal.
I am assumong that the core is blocked....
Can anyone help?
Thanks
Ken
RIP
11-27-2007, 12:01 AM
http://www.autozone.com/az/cds/en_us/0900823d/80/10/c9/71/0900823d8010c971/repairInfoPages.htm Alldata.com would have a better one.
Don't assume. Check it. Disconnect the hoses at the firewall and poor water in the supply tube. If water doesn't run out the return tube at about the same rate, it's blocked. If equipped, is the on/off valve attached to the temperature control lever working?
Don't assume. Check it. Disconnect the hoses at the firewall and poor water in the supply tube. If water doesn't run out the return tube at about the same rate, it's blocked. If equipped, is the on/off valve attached to the temperature control lever working?
Automotive Network, Inc., Copyright ©2025
