need new motor
dumbluck2
11-25-2007, 05:55 PM
plz list links to here i can find one thanks
maxwedge
11-25-2007, 06:39 PM
How about calling a local salvage yard, they all network country wide? Why would we have to do this for you?
dumbluck2
11-25-2007, 08:04 PM
just asking i was online 11/2 hr's couldnt realy find any rebuild kit's or motors
HotZ28
11-25-2007, 08:57 PM
You can contact Ed Morad for complete engine assy;
GTPED@msn.com
GTPED@msn.com
dtownfb
11-26-2007, 06:33 PM
you can always check Ebay.
dumbluck2
11-26-2007, 06:46 PM
oki have ben looking around some.an have a few qustions. an the way i figure it if im geting a new motor i want to go supercharged. :screwy:? any how just wondering if this motor would bolt in just the same as the stock one did?
if you have any in put that would be of any use plz feel free thanks.
http://cgi.ebay.com/ebaymotors/GM-3-8l-L67-Series-II-Supercharged-Engine-w-4t65e-hd_W0QQcmdZViewItemQQcategoryZ33615QQihZ013QQitemZ 230187921412QQtcZphoto
if you have any in put that would be of any use plz feel free thanks.
http://cgi.ebay.com/ebaymotors/GM-3-8l-L67-Series-II-Supercharged-Engine-w-4t65e-hd_W0QQcmdZViewItemQQcategoryZ33615QQihZ013QQitemZ 230187921412QQtcZphoto
LittleHoov
11-26-2007, 09:40 PM
It will bolt in yes, but you will also need the PCM from an L67 vehicle, and probably the rest of the wiring harness to go with it.
The transmission should bolt up, but probably wont last long at all. So you at a minimum would need axles and a differential and probably more from a donor vehicle.
It can be done, and has been done many times, but theres quite a bit more too it than just dropping in an engine and going. If youre really interested I can dig up more info, but Im just going off memory from discussions at another forum.
The transmission should bolt up, but probably wont last long at all. So you at a minimum would need axles and a differential and probably more from a donor vehicle.
It can be done, and has been done many times, but theres quite a bit more too it than just dropping in an engine and going. If youre really interested I can dig up more info, but Im just going off memory from discussions at another forum.
dumbluck2
11-27-2007, 05:31 PM
ok yea the motor in the link come"s with motor trans pcm an wireing.so all i would need from there is the pansnger side axle from a gtp rite?i was reading some where that i can reuse the stock wires with this adapter from think it's acc?
but yea im really interested in doing this i don't see it being that much harder then what i allready did to the car? an if i can use my stock wires with that kit it should be gravy! an i realy don"t need the car rite now so i have time to mess around a bit with it.a big worrie is spending the money on the used motor an it being a dud? or geting it an runing in to a hole bunch of crap cousting me way more then i ever thought. iwant to spend no more then $2300 if not ges ill tear back down the old motor an find out my it has only 25lb on #1 cly with 94k miles on it
but yea im really interested in doing this i don't see it being that much harder then what i allready did to the car? an if i can use my stock wires with that kit it should be gravy! an i realy don"t need the car rite now so i have time to mess around a bit with it.a big worrie is spending the money on the used motor an it being a dud? or geting it an runing in to a hole bunch of crap cousting me way more then i ever thought. iwant to spend no more then $2300 if not ges ill tear back down the old motor an find out my it has only 25lb on #1 cly with 94k miles on it
dumbluck2
11-27-2007, 07:00 PM
ok guys just got off the phone with my friend that has a 98 g prix with 70k on it she only wants $650 so im going to look at it if it starts an runs good there we have it motor an trans $650 the trans will work in my car rite?
panzer dragoon
12-01-2007, 06:18 AM
find out if that tranny is a 4T60 and not the usual Intrigue 4T65e
-I looked into it and believe you are ok.
-I looked into it and believe you are ok.
Automotive Network, Inc., Copyright ©2025