Our Community is 940,000 Strong. Join Us.


98 Sonoma start up problem


tribble
11-08-2007, 09:45 PM
My 4 cylinder 98 Sonoma has been hesitating for a few seconds when I turn the key and then it starts and runs fine. I thought it might be the battery so I had that replaced but that wasn't it. It doesn't happen all the time, usually when it's cold or raining. I am a girl who doesn't know much about truck repairs so I would appreciate any help.
http://img.photobucket.com/albums/v495/iamtribble/girl_sigh.gif

old_master
11-08-2007, 09:51 PM
Not sure if I understand... does the starter hesitate when you turn the key, or the starter cranks a bit before the engine runs?

tribble
11-08-2007, 09:57 PM
It turns over but it hesitates before it fires up. It sort of makes the sound like when you have a dead battery but only for a second or two. Not that tick tick tick of a dead battery but the sluggish turnover. Does that make sense?

old_master
11-08-2007, 10:05 PM
Yes, that makes sense! When the battery was replaced, they probably cleaned the connections at the battery however, you might want to check the battery cable connection at the starter, and the ground cable connection where it's bolted to the engine. They need to be shiney clean and tight. A wire brush or file works well for cleaning. ;)

tribble
11-08-2007, 10:08 PM
Thank you OM, I will try that tomorrow and let you know if it helped!

tribble
11-09-2007, 07:58 AM
Thank you, Thank you OM! That seems to do the trick, it is raining this morning and it started up fine after I cleaned up the doohickeys!

I hope you have a great day!

old_master
11-09-2007, 07:15 PM
Doohickeys??? Too funny, I know what you're talking about though. Did you remove the bolts and clean the eyelet connectors?

tribble
11-09-2007, 08:56 PM
I can't say as I removed any bolts but everything else is gleaming!

old_master
11-09-2007, 09:35 PM
If you have any more trouble, it might be a good idea to remove the battery negative cable from the battery, (to avoid any sparks), then take the connections apart and shine 'em up with a wire brush or a file.

Add your comment to this topic!