boost gauge wiring 2g

I basically need an idiots guide on how to wire my boost gauge. I have the vaccume lines figured out, but I cant seem to find or locate what wires to cut and put where. Please help me!

Thank you kindly

Thats a good write up, but why did he run the 12v wire all the way down beside the seat. I tapped into the wire behind my gauges, or you could use the dimmer switch and it would be a much shorter wire.

I think the dimmer switch idea is the best, because then you can fade your gauges in and out with the rest of the interior, as for why he used the taillight wire, I have no idea.

If you want to tap into the dimmer switch, read here.

http://www.vfaq.com/mods/gaugelit.html

Will the 1g's be the same as a 2g's

For the most part. The only problem is that the gauges use led lights so they wont dim very much. On the plus side thats less current drawn by the gauge so you dont have to worry about over loading the circuit.

I say fuck the dimmer switch, how often do you use it? I'm still going to do it that way, but I think its retarded that there is even one.