cam specs

I have been doing a lot of searching and am having trouble finding cam specs for stock d series motors. any one come across any specs?

i think the link is www.bullfrog.com

there are also several places online that don't sell cams, and just list the specs for every aspect of Honda engines... check out www.rockauto.com, they might even list the intake/exhaust and duration specs.

i think the link is www.bullfrog.com (http://www.bullfrog.com)

there are also several places online that don't sell cams, and just list the specs for every aspect of Honda engines... check out www.rockauto.com (http://www.rockauto.com), they might even list the intake/exhaust and duration specs.

www.bullfrog.com (http://www.bullfrog.com) is a wind energy website. I guess I don't follow????
I had checked out Rockauto and they don't list a bunch of cam specs.

D16Y8 camshaft (intake/exhaust):



Advertised Duration 247/235
Duration @ 0.050'' 217/204
Gross Lift 397/370
Lobe Separation 114/110

D16Z6 camshaft (intake/exhaust):


Advertised Duration 244/228
Duration @ 0.050'' 208/192
Gross Lift 384/370
Lobe Separation
D16A6 camshaft (intake/exhaust):

Advertised Duration 222/224
Duration @ 0.050'' 194/196
Gross Lift 333/362
Lobe Separation 110



Found in a 5 second search on Google here:http://www.hadamotorsport.com/tech/review/d16camshafts.html

D16Y8 camshaft (intake/exhaust):



Advertised Duration 247/235
Duration @ 0.050'' 217/204
Gross Lift 397/370

Lobe Separation 114/110



D16Z6 camshaft (intake/exhaust):


Advertised Duration 244/228
Duration @ 0.050'' 208/192
Gross Lift 384/370

Lobe Separation
D16A6 camshaft (intake/exhaust):





Advertised Duration 222/224
Duration @ 0.050'' 194/196
Gross Lift 333/362
Lobe Separation 110



Found in a 5 second search on Google here:http://www.hadamotorsport.com/tech/review/d16camshafts.html


You I know I found that site too. That site is posted in a million blogs. There are a lot more d serious motors that just the ones listed above. That is more what I was getting at. Sorry if I wasn't specific enough.

ok, then be more specific... which engine are you looking for?

What I was getting at is: is there some info out the for all stock d-series cams. if not all at least a list of the more common d-series engines? Think about it. All the info out there on head swaps, and we don't even know the specs on the cam and what kind of lift and duration it has. All we know is what kind of hp the head is capable of.

bullfrog is a cam regrind company, they make D16A1 and ZC cams most significantly...

You'll have to google their name, other than that, have you considered calling honda? they're not usually uptight w/ information about their older models.

bullfrog is a cam regrind company, they make D16A1 and ZC cams most significantly...

You'll have to google their name, other than that, have you considered calling honda? they're not usually uptight w/ information about their older models.

Thanks... I will try and contact Honda and see what I come up with. If I get some info I will definetly relay it back

Zex 53900 is a good cam...its one of the most common ones used in turbo D series cars

If you get the info from Honda, post it up in a thread and ask the admins for sticky status, I'm sure other's would like to use it too.