another scrap model....

Thanks to testor again to scrap my Supra Body... will never buy testor spraycan again....

So how to get rid of this paint and primer ? I don't have Castrol Super clean, so I need help ? Do I need to let it try then sand it for 18 hours in a row or there is an other solution (other than take the body and trow it away)
Testor Gray primer (sux big time)
Model master (testor) Pure White


:flamer: TESTOR:apuke:

:smoka: CSC is the best although ive never used iut, i just use easy off oven cleaner:alien2:
:frog: put the model inyto a plastic tub praythe easy off all around the model and wwait a good 10 hours or less but not much less, then take a toothbrush and scrub the paint away:frog:

dry or fresh paint ?

right now it's fresh (just scrap the body 10 minute ago) do I need to wait a couple of hour to let it dry ?

well i wouild wait a while to let it dry a little then use the easy off:sun:

ok I have tryd with a small part (interior bumper) and it seem to work.. at least, I see the primer through the white paint... I will pray to not scrap the kit :(

:silly2: and i think i should add: use rubber glovves and a mask or respirtor, that easy off is a killer, also i will take off all of the paint but probably not all of the primer:silly2:

Originally posted by fullbloodchop01
[Bwill take off all of the paint but probably not all of the primer:silly2: [/B]

true.. cant get out the damn primer !

paint geting out easy in 1 hour...

vric. get some castrol super clean at Walmart.

it's the easiest to get off enamel... very fast too..

make sure u wear gloves

Originally posted by djmr2
vric. get some castrol super clean at Walmart.

it's the easiest to get off enamel... very fast too..

make sure u wear gloves

thanks... i thing i will wait and when it will be dry, I will sand it.. will take more time, but i'm a bit out of money (xmas)

Will cover with Tamiya Primer and Tamiya paint after... should not be a problem

after 5 hours of work with easy off and a toothbrush, the body is safe !

need to sand it a bit but it should be ok.. thanks for the help

I just got some tamiya paint from my hobbyshop... hope it will be better

Originally posted by Vric
after 5 hours of work with easy off and a toothbrush, the body is safe !

need to sand it a bit but it should be ok.. thanks for the help

I just got some tamiya paint from my hobbyshop... hope it will be better

:frog:

At least you saved it.
Does the wordTAMIYA ring a bell ;) ;) ;)

Originally posted by primera man
At least you saved it.
Does the wordTAMIYA ring a bell ;) ;) ;)

yes master :rolleyes: