2.4, tried what I know....please help!!!
underachieva
10-26-2007, 08:51 PM
Ok, my Achieva was hesitating bad on highway, tried replacing coil pack housing, and spark plugs. Worked good for 2 days. Suddenly it not only reverted back to the previous condition, it now acts, and sounds like it is running on only 2 cylinders. Had the coils checked...they were fine. Checked to see if I was getting spark to all 4...Check. Now What?? Could it be a fuel problem or what. My wifes jeep is going in the shop next week and this was the only running vehicle we had. I need any and all ideas!
Thanks!!!
Thanks!!!
xeroinfinity
10-26-2007, 11:20 PM
Welcome to AF.
Have you tested/checked the ignition control module (ICM) ?
If so, then it's possible it could be fuel related.
Could be low fuel pressure or clogged/dirty injectors.
Have you tested/checked the ignition control module (ICM) ?
If so, then it's possible it could be fuel related.
Could be low fuel pressure or clogged/dirty injectors.
underachieva
10-31-2007, 02:22 PM
Yeah, I had the ICM checked and it was good. I borrowed an OBD scanner from Autozone. I got three codes:
P0172 System lean
P0300 Random cylinder misfire
P1441 manufacturer controled aux. emmision controls
Any ideas???
P0172 System lean
P0300 Random cylinder misfire
P1441 manufacturer controled aux. emmision controls
Any ideas???
xeroinfinity
10-31-2007, 06:18 PM
P0172 System too Rich (Bank 1)
P0300 Random/Multiple Cylinder Misfire Detected
P1441 Evap System Flow During Non-Purge
What year was your Achiever ??
P0300 Random/Multiple Cylinder Misfire Detected
P1441 Evap System Flow During Non-Purge
What year was your Achiever ??
underachieva
10-31-2007, 07:13 PM
It`s a `96.
Automotive Network, Inc., Copyright ©2026
