Subaru HID Conversion Kit Installation for Mazda protege5

1. First, remove dust cap and carefully remove factory headlight bulbs.

2. Replace with Xenon-Charged Bulbs.

3. Most important thing, find the a mounting location for the ballasts.
For driver side: I have mounted ballast to the fuse box by drilling holes into it.http://www.msprotege.com/members/Bijou-MP5/HID/IMG_0392.JPG


http://www.msprotege.com/members/Bijou-MP5/HID/IMG_0394.JPG


http://www.msprotege.com/members/Bijou-MP5/HID/IMG_0396.JPG

For Passenger side: I mount my ballast to empty space besides cruise control. however, double sided tapes did not hold a ballast strong enough, so I went to Menards and got myself L-shape braket.http://www.xenonexpert.com/protege5/IMG_0426_resize.jpg


http://www.xenonexpert.com/protege5/IMG_0427_resize.jpg


4. Connect the power wire harness to the ballast.

5. Connect the HID bulb to the ballast using the factory headlight socket.

http://www.xenonexpert.com/protege5/IMG_0430_resize.jpg


http://www.xenonexpert.com/protege5/IMG_0431_resize.jpg


6. Make sure bulbs are secured tightly and dust cover cap is properly enclosed.

http://www.xenonexpert.com/protege5/IMG_0436_resize.jpg


http://www.xenonexpert.com/protege5/IMG_0434_resize.jpg


http://www.xenonexpert.com/protege5/IMG_0435_resize.jpg


7. Reconnect the car battery cables and make sure all components are secured.

8. Turn light switch on and enjoy your brand new Xtec HID headlights. http://www.mazdas247.com:8080/smilies/smile.gif


http://www.msprotege.com/members/Bijou-MP5/HID/IMG_0403_resize.JPG


http://www.msprotege.com/members/Bijou-MP5/HID/IMG_0442.JPG


http://www.msprotege.com/members/Bijou-MP5/HID/IMG_0448.JPG


http://www.xenonexpert.com/protege5/IMG_0447.jpg

http://www.kusoz.com/forums/kusoz-hid-diy/56-subaru-hid-conversion-kit-installation-for-mazda-protege5.html