Cant change gears
wvswede
10-21-2007, 07:39 PM
Hi there guys!
Have a question that has me completly lost.
I had a "Squeaky" master cylinder on a kia and in hot weather it would actually stick, the clutch pedal would not come back up unless lifting it with your foot.
I replaced the master cylinder this weekend and "bled" the master cylinder(making sure there is no air in it) The squeaky noise is gone but cant shift gears at all, i can start in 1st or reverse no problem let go of clutch and take off, but trying to switch gears is impossible any ideas suggestion
PG
Have a question that has me completly lost.
I had a "Squeaky" master cylinder on a kia and in hot weather it would actually stick, the clutch pedal would not come back up unless lifting it with your foot.
I replaced the master cylinder this weekend and "bled" the master cylinder(making sure there is no air in it) The squeaky noise is gone but cant shift gears at all, i can start in 1st or reverse no problem let go of clutch and take off, but trying to switch gears is impossible any ideas suggestion
PG
LMP
10-22-2007, 12:48 PM
I've no experience with the manual and its idiosyncrasies but the guys at 4x4wire.com trail talk bbs are experts in extreme...they surely have encountered that before....several of them post here too....
wvswede
10-25-2007, 02:35 PM
Turned out that the clutch did not travel as much as it should, Bled slave cylinder.Clutch works just fine now.
Automotive Network, Inc., Copyright ©2025