parting out good 92-95 GM 3800 series II engine
randy78
10-14-2007, 11:57 PM
lots of good parts parting a series II 3800 GM v-6 engine
nice fuel rail and injectors
good TB assembly and all sensors in it; TP sensor, idle air control, MAF sensor, etc. all in good running order,
good belt tensioner assembly
all engine mounted sensors, all good running order
good flexplate for 4L60E trans
good crankshaft
good waterpump and pulley
good timing cover assembly and oil filter adapter/pressure/pump assembly
good oil pan with oil level sensor hole
good camshaft and lifters
good pistons and rods,
good cylinder heads pair,
lots of other nice parts from this engine available
part numbers from parts available on any that have them, just ask
my zip is 62656 if you want to figure mail cost and make an offer on anything
randy
nice fuel rail and injectors
good TB assembly and all sensors in it; TP sensor, idle air control, MAF sensor, etc. all in good running order,
good belt tensioner assembly
all engine mounted sensors, all good running order
good flexplate for 4L60E trans
good crankshaft
good waterpump and pulley
good timing cover assembly and oil filter adapter/pressure/pump assembly
good oil pan with oil level sensor hole
good camshaft and lifters
good pistons and rods,
good cylinder heads pair,
lots of other nice parts from this engine available
part numbers from parts available on any that have them, just ask
my zip is 62656 if you want to figure mail cost and make an offer on anything
randy
Automotive Network, Inc., Copyright ©2025