Please Help Me!!!
Dspade
10-10-2007, 08:28 PM
Ok so here is the problem... My car is running very rough. It has stalled a few times at a red light or stop sign. I pulled the codes on it and it came back with a crankshaft position sensor A and B malfunction code as well as P0443 EVAP Emission Control System Purge Vale C Fault. First can someone tell me where the crankshaft sensors are located?
It also came back with P0741 Torque Converter CKT Performance or Stuck off
and P1860 Manufacturer Control Transmission. Can anyone help me with this?
It also came back with P0741 Torque Converter CKT Performance or Stuck off
and P1860 Manufacturer Control Transmission. Can anyone help me with this?
apollo7879
10-10-2007, 09:39 PM
According to the book, both crankshaft position sensors are located
in the "lower left hand front of the engine compartment", as viewed
from the drivers seat.From the front of the car they will be right of,
and slightly above the oil filter.
1996 AURORA BOOK
in the "lower left hand front of the engine compartment", as viewed
from the drivers seat.From the front of the car they will be right of,
and slightly above the oil filter.
1996 AURORA BOOK
Dspade
10-10-2007, 10:18 PM
Do you know if there is any difference in the 96 and 01 models? Im almost positive its the same engine (4.0 northstar). Any ideas as to why the torque converter could be stuck? Possibly a sensor?
Automotive Network, Inc., Copyright ©2026