Our Community is over 1 Million Strong. Join Us.


1994 3.8 Transport throwing alot of codes


start_cleaning
10-02-2007, 08:21 PM
Hello I have been reading through this forum and it is so cool.
I have a question: 1994 3.8 transport was stalling alot drive and idle,ran the codes - OMG said TPS,IAC,crank sensor,cam sensor,EST and about 5 others!Now how could they ALL be bad? This is what I did I cleared all the codes,ran it again,ran the codes again and came up with only TPS. There were 2 issues that got me running codes.First it was bogging,stalling at stop/idle/sometimes drive.Then it began not restarting after warm up,have to wait an hour or so before retrying.It has spark,fuel,etc. it spins with no clicks,no unusual sounds and i do hear the fuel pump on,it just doesnt start! after completely cooling she fires right up.Any ideas?

LMP
10-09-2007, 01:52 AM
...it began not restarting after warm up,have to wait an hour or so before retrying.... after completely cooling she fires right up.Any ideas?
This is typical of dying crank position sensor. Test for spark and/or injector firing when hot and no start. Other symptoms you describe are relevant with TPS failure.

Add your comment to this topic!


Quality Real Meat Nutrition for Dogs: Best Air Dried Dog Food | Real Beef Dog Food | Best Beef Dog Food